期刊文献+

非独立悬架轻型客车操纵稳定性仿真分析(二)

Simulation and Analysis on Handling Stability of Dependent Suspension Light Duty Bus(Ⅰ)
下载PDF
导出
摘要 以前后悬架均为钢板弹簧非独立悬架的某轻型客车为研究对象,利用ADAMS/Car模块,建立起整车动力学仿真模型,并对该车进行了方向盘转角阶跃输入仿真试验,同时分析了前后悬架钢板弹簧刚度对汽车转向特性的影响,提示了钢板弹簧刚度和操纵稳定性的内在联系。 This paper aims at a light bus both front and rear suspension with leaf spring structure. Using ADAMS/Car module, a full vehicle dynamic model is built. By means of the step angle input of steering wheel, this paper analyzed the impact of front and rear suspension leaf spring stiffness on steering characteristics. It presents the relationship between leaf spring stiffness and handling stability performance.
出处 《传动技术》 2011年第1期31-31,41,17,共3页 Drive System Technique
关键词 非独立悬架 轻型客车 操纵稳定性 ADAMS/CAR Dependent suspension Light duty bus Handling stability ADAMS/Car
  • 相关文献

参考文献4

  • 1邓亚东,余路,苏楚奇.ADAMS在汽车操纵稳定性仿真分析中的运用[J].武汉大学学报(工学版),2005,38(2):95-98. 被引量:14
  • 2H-P.威鲁麦特.车辆动力学.北京:北京理工大学出版社,1998.
  • 3Jayakumar,P.,and Alanoly,J.1999,"Three-Link Leaf-Spring Model For Road Loads,"Report N0.AVT507-MT99-0001,Durability CAE Development & Pre-Programs,Advanced Vehicle Technology,Ford Motor Company,Dearborn,Michigan.
  • 4GB/T6323.2-94汽车操纵稳定性试验方法转向瞬态响应试验转向盘转角阶跃输入.中国标准出版社,1994.

二级参考文献4

  • 1余志生.汽车理论[M].北京:机械工业出版社,1989..
  • 2庄继德.汽车轮胎学[M].北京:北京理工大学出版社,1997..
  • 3[德]威鲁麦特HP.车辆动力学模拟及其方法[M].北京:北京理工大学出版社,1998..
  • 4.车轮标准手册—车轮和轮胎国际标准.[S].中国农机工业协会车轮行业协会,1994..

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部