氨氮废水处理工程设计

Engineering Design on Wastewater Treatment of Ammonia Nitrogen

采用水解+IMC池+BAF工艺处理氨氮废水。进水水质CODC r=500 mg/L,NH3-N:350 mg/L时,经该工艺处理后出水能够满足环评对总量控制(CODC r=20 mg/L,NH3-N:3 mg/L)的要求。

Hydrolyzation＋IMC pond（improved SBR process）＋BAF process was adopted for ammonia nitrogen wastewater treatment.If the influent were CODCr=500 mg/L and NH3-N：350 mg/L,the effluent after treatment by such a process can meet the requirement of environmental evaluation for total amount control（CODCr=20 mg/L,NH3-N： 3 mg/L）.