摘要
A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an Euler solver is used to model the near wake evolution and transonic flow phenomena in the vicinity of the blade,and a full potential equation（FPE） is used to model the isentropic potential flow region far away from the rotor,while the wake effects of other blades and the far wake are incorporated into the flow solution as an induced inflow distribution using a Lagrangian based wake analysis.To further reduce the execution time,the computational fluid dynamics（CFD） solution and rotor wake analysis（including induced velocity up-date） are conducted parallelly,and a load balancing strategy is employed to account for the information exchange between two solvers.By the developed method,several hover and forward-flight cases on Caradonna-Tung and Helishape 7A rotors are per-formed.Good agreements of the loadings on blade surface with available measured data demonstrate the validation of the method.Also,the CPU time required for different computation runs is compared in the paper,and the results show that the pre-sent hybrid method is superior to conventional CFD method in time cost,and will be more efficient with the number of blades increasing.
A hybrid Euler/full potential/Lagrangian wake method,based on single-blade simulation,for predicting unsteady aerodynamic flow around helicopter rotors in hover and forward flight has been developed.In this method,an Euler solver is used to model the near wake evolution and transonic flow phenomena in the vicinity of the blade,and a full potential equation（FPE） is used to model the isentropic potential flow region far away from the rotor,while the wake effects of other blades and the far wake are incorporated into the flow solution as an induced inflow distribution using a Lagrangian based wake analysis.To further reduce the execution time,the computational fluid dynamics（CFD） solution and rotor wake analysis（including induced velocity up-date） are conducted parallelly,and a load balancing strategy is employed to account for the information exchange between two solvers.By the developed method,several hover and forward-flight cases on Caradonna-Tung and Helishape 7A rotors are per-formed.Good agreements of the loadings on blade surface with available measured data demonstrate the validation of the method.Also,the CPU time required for different computation runs is compared in the paper,and the results show that the pre-sent hybrid method is superior to conventional CFD method in time cost,and will be more efficient with the number of blades increasing.
基金
National Natural Science Foundation of China (10872094)
