摘要
用SEM和XRD等测试方法分析不同热轧带钢表面氧化皮的组成及结构。通过湿热试验、极化和交流阻抗测试(EIS)及扫描Kelvin探针系统(SKP)测试,探讨了热轧带钢表面氧化皮与其耐蚀性能之间关系。结果表明:湿热试验的腐蚀增重与时间的关系符合△W=Dt^n;WL510钢氧化皮的初期耐腐蚀性能优于B510L钢,在腐蚀的后期,B510L钢腐蚀的发展可能要慢于WL510钢。
SEM XRD were used to analyse the phase composition and structure of oxide scales on different hot rolled strip steels. Research on the relationship between oxide scale of hot rolled strip steel and its corrosion resistance was carried out by heat-damp test, polarization, electrochemical impedance spectroscopy (EIS) and scanning kelvin probe (SKP). The correlation between mass gain and test time accorded with exponential rule as △W=Dt^n in the heat-damp test. The experiment results showed that the initial weather resistance of oxide scale on the WL510 steel was better than that of B510L steel. However, in the later stage of atmosphere corrosion, corrosion development trends of B510L steel may more slowly than that of WL510 steel.
出处
《中国腐蚀与防护学报》
CAS
CSCD
北大核心
2011年第2期139-144,共6页
Journal of Chinese Society For Corrosion and Protection
基金
国家自然科学基金项目(50871051)
教育部无损检测重点实验室基金项目(ZD200729003)
江西省教育厅重点实验室基金项目(DB200901399)
江西省自然科学基金项目(2009GZC5009)资助
关键词
热轧带钢
氧化皮
耐蚀性能
大气腐蚀
hot rolled strip steel, oxide scalc, corrosion resistance, atmospheric corrosion