摘要
搭建了一台全光纤结构的光纤激光器。采用双端泵浦结构,共有36个泵浦输入端。在使用其中的24个泵浦输入端,泵浦功率为1 477 W时,获得了1 008 W高功率输出,光光转换效率为68%。输出激光的中心波长为1 082 nm,半波全宽为3 nm。目前激光器输出功率受限于泵浦功率,增加泵浦源的数目有望进一步提高输出功率。
We report a high-power fiber laser in all-fiber format.The system consists of 36 pump ports,both counter and forward pump configuration are employed.In the experiment,1 008 W fiber laser is obtained when 24 pump ports are employed with a total pump power of 1 477 W.The optical-to-optical conversion efficiency is 68%.The central wavelength of the output laser is 1 082 nm with a 3 dB bandwidth of 3 nm.Presently,the output power is limited by the pump source.It can be predicted that the laser power can be further scaled if more pump sources are employed.
出处
《强激光与粒子束》
EI
CAS
CSCD
北大核心
2011年第5期1137-1138,共2页
High Power Laser and Particle Beams
关键词
光纤激光器
全光纤
单模
激光二极管
fiber laser
all-fiber format
single mode
laser diode