Effect of NH3 on corrosion resistance of Cu-Zn alloy in 3.5 % NaCl solution
Effect of NH3 on corrosion resistance of Cu-Zn alloy in 3.5 % NaCl solution
出处
《材料科学与工程(中英文版)》
2008年第4期43-47,共5页
Journal of Materials Science and Engineering
参考文献8
-
1王继东,徐静英.Cu-Cr合金在3.5%NaCl+NH_3溶液中的腐蚀行为[J].物理测试,2004,22(6):5-7. 被引量:4
-
2朱小龙,林乐耘,雷廷权.70Cu—30Ni合金海水腐蚀产物膜形成过程[J].金属学报,1997,33(12):1256-1261. 被引量:31
-
3朱志平,杨道武,李宇春.凝汽器空冷区铜管氨腐蚀过程分析与防护措施[J].中国电力,2002,35(5):23-26. 被引量:13
-
4韩忠,赵晖,林海潮.QAl9-2合金脱铝腐蚀的TEM研究[J].中国有色金属学报,2001,11(3):428-432. 被引量:7
-
5王吉会,姜晓霞,李诗卓.铜合金在3.5%NaCl+NH_3(NH_4^+)溶液中的腐蚀磨损行为[J].金属学报,1997,33(12):1268-1274. 被引量:10
-
6郭海霞,梁成浩.Cu-Zn-Al形状记忆合金的缝隙腐蚀[J].稀有金属材料与工程,2001,30(1):27-30. 被引量:14
-
7司乃潮.工业酸性废水对CuZnAl形状记忆合金腐蚀的影响[J].金属学报,1999,35(11):1160-1162. 被引量:11
-
8陈邦义,梁成浩,傅道军.Cu-Zn-Al形状记忆合金在模拟宫腔液中的腐蚀行为[J].中国有色金属学报,2004,14(4):596-601. 被引量:2
二级参考文献55
-
1李金平,罗守靖,纪松,胡伟晔,龚朝晖.爆炸烧结CuCr触头材料的性能[J].中国有色金属学报,2001,11(z1):98-101. 被引量:24
-
2吴廷斌,江伯鸿,漆璿.NiTi形状记忆薄膜的应用及进展[J].中国有色金属学报,2001,11(z2):6-10. 被引量:8
-
3F. Gesmundo,Y Niu,F. Vianiand D.L. Douglass(Universita di Genova, Fiera del Mare, Pad. D,16129 Genova, Italy)(State Key Lab. for Corrosion and Protection, Institute of Corrosion and Protection of Metals, theChinese Academy of Sciences, Shenyang 110015, Ch.OXIDATION OF A TWO-PHASE Cu-75Cr ALLOY IN AIRAT 700-900℃[J].Acta Metallurgica Sinica(English Letters),1997,10(4):333-341. 被引量:21
-
4张承典,徐乃欣,杨秉炎.含铜宫内节育器中铜的腐蚀[J].生殖与避孕,1994,14(3):163-168. 被引量:12
-
5李文彬,王玉柱.CuZnAl形状记忆合金在恒温器上应用初探[J].铸造技术,1994,19(2):10-13. 被引量:1
-
6张承典,徐乃欣,陆菊芳,丁翠红,杨秉炎.用电化学方法研究IUD在人工配制液中铜的腐蚀[J].生殖与避孕,1995,15(1):28-32. 被引量:19
-
7张承典,徐乃欣,陆菊芳,丁翠红,杨秉炎.模拟宫腔液中铜腐蚀行为的研究[J].中国腐蚀与防护学报,1995,15(4):261-266. 被引量:11
-
8-.化学工程手册[M].化学工业出版社,1989(5).21-250,376,373.
-
9窦照英.电力工业的腐蚀与防护[M].北京:化学工业出版社,1995..
-
10杨武 顾睿祥.金属的局部腐蚀[M].北京:化学工业出版社,1995.75-84.
共引文献75
-
1曾立军,龙新峰,梁平.凝汽器铜管氨腐蚀分析及其无铜化改造[J].华电技术,2006,29(9):40-45. 被引量:2
-
2星成霞,李永立,王应高,翟雅.电厂水汽中微量氨含量测定方法研究[J].热力发电,2013,42(7):135-137. 被引量:1
-
3张晗,陈民芳.纳米硫酸钡/聚乙烯复合材料的制备及其加速老化性能[J].复合材料学报,2015,32(1):27-31. 被引量:3
-
4周永欣,吕振林,张敏,赵西城,范志康.航用蒙乃尔合金摩擦磨损特性的研究[J].兵器材料科学与工程,2004,27(5):24-27. 被引量:11
-
5徐桂芳,程晓农,司乃潮,李霞章,李玉祥.不同磨损介质下铜锌铝形状记忆合金滚动磨损性能与磨损机制研究[J].新技术新工艺,2004(8):46-49. 被引量:3
-
6梁成浩,陈婉,郭海霞,陈邦义.生理盐水中生物医用TiNi基形状记忆合金的腐蚀行为[J].稀有金属材料与工程,2005,34(1):135-138. 被引量:8
-
7LIANGChenghao CHENBangyi CHENWan WANGHua.Electrochemical behavior of Cu-Zn-Al shape memory alloy after surface modification by electroless plated Ni-P[J].Rare Metals,2004,23(4):317-321. 被引量:1
-
8朱志平,杨道武,周琼花,马迪东.凝汽器空冷区铜管汽侧氨腐蚀研究[J].腐蚀科学与防护技术,2005,17(2):101-103. 被引量:10
-
9朱志平,黄可龙,周琼花,杨道武,陈恳.凝汽器铜管氨腐蚀的研究[J].材料保护,2005,38(7):46-48. 被引量:4
-
10吴波,梁成浩,王鹏.镁牺牲阳极法制备羟基磷灰石涂层的电化学性能(英文)[J].稀有金属材料与工程,2010,39(12):2069-2074. 被引量:1
-
1许涛,张海龙,肖念新,赵香玲.Effect of Heat Treatment on the Microstructure and Corrosion Resistance of Cu-Zn Alloy[J].Journal of Rare Earths,2007,25(S2):182-184.
-
2ZHAO Juna,LIU Lin,YANG Jingru,PENG Guirong,LIU Jianhua,ZHANG Ruijuna,XING Guangzhong.Effects of high pressure on the microstructure and hardness of a Cu-Zn alloy[J].Rare Metals,2008,27(5):541-544. 被引量:18
-
3Wang, LD,Chen, CG,Shi, YM,Kang, MK,Ji, BJ.Thermodynamics of Ordering-Disordering Transformation in Cu-Zn Alloy System[J].Journal of Materials Science & Technology,1999,15(5):478-479.
-
4刘建华,徐进,何淼,杨坤,张瑞军.Effect of high Pressure on the Solid-State Phase Transformation Microstructure of Cu-Zn Alloy[J].Journal of Rare Earths,2007,25(S2):185-187.
-
5张瑞军,徐亮,刘建华.Effect of Deformation on Order-Disorder Phase Transformation in Cu-Zn Alloy[J].Journal of Rare Earths,2007,25(S2):176-178.
-
6CHAI Huifen RUAN Zheng FAN Quncheng (Xi’an Jiaotong University,Xi’an,China CHAI Huifen,associate professor,Department of Materials,Xi’an Jiaotong University,Xi’an 710049,China.EFFECTS OF SLIP MODE ON CYCLIC BEHAVIOR OF PRESTRAINED MATERIALS[J].Acta Metallurgica Sinica(English Letters),1993,6(5):326-331.
-
7WANG Man,LIANG Jinsheng,TANG Qingguo,MING Xing,MENG Junping,DING Yan.Surface free energy of copper-zinc alloy for energy-saving of boiler[J].Rare Metals,2006,25(z1):324-327. 被引量:6
-
8Yuan-hua Cai,Cong Wang,Ji-shan Zhang.Microstructural characteristics and aging response of Zn-containing Al-Mg-Si-Cu alloy[J].International Journal of Minerals,Metallurgy and Materials,2013,20(7):659-664. 被引量:25