期刊文献+

磁场作用下偏晶合金凝固组织演变的数值分析 被引量:4

Numerical Analysis of the Microstructure Evolution of Monotectic Alloys in Magnetic Field
原文传递
导出
摘要 建立偏晶合金难混溶区凝固过程的两相数学模型,模拟研究了有、无磁场Al-10%Bi过偏晶合金微观组织演变,研究了温度、速度、第二相体积分数等物性参数对凝固组织宏观偏析的影响。结果表明,在磁场作用下温度场为中心对称分布,更有利于第二相液滴的均匀分布;电磁力抵消了部分重力和Marangoni力,使无磁场时外环流的速度场变为有磁场时斜向下的速度场,且速度明显降低,从而减轻了强对流导致的重力偏析;在磁场的作用下,试样底部第二相的体积分数减小,凝固组织宏观偏析得到改善。 A two-phase mathematical model for the solidification process of monotectic alloys through the miscibility gap was established.The effect of magnetic field on the microstructural evolutions of an Al-10%Bi hypermonotectic alloy was investigated,and the effect of temperature,velocity and second phase volume fraction distribution on the macrosegregation were analyzed.The results showed that the centrosymmetric distribution of temperature field in the magnetic field was more advantageous to the uniform distribution of second phase droplets.Because partial gravity force and Marangoni force were counteracted by the Lorentz force,the velocity field changed from the outward circumfluence to the moving downward slope form in the magnetic field,and the velocity reduced obviously,thus the gravity segregation caused by strong convection was suppressed.Second phase volume fraction reduced in the specimen bottom in the magnetic field,and the macrosegregation was improved.
出处 《材料研究学报》 EI CAS CSCD 北大核心 2011年第2期124-128,共5页 Chinese Journal of Materials Research
基金 国家高技术研究发展计划2007AA032519 国家自然科学基金项目50574027和50901019 高等学校博士学科点专项科研基金20070145062 高等学校学科创新引智计划B07015资助项目~~
关键词 金属材料 磁场 数值模拟 微观组织演变 偏晶合金 宏观偏析 metallic materials magnetic field numerical simulation microstructural evolution monotectic alloy macrosegregation
  • 相关文献

参考文献2

二级参考文献24

  • 1T. Wang,B. Pustal,M. Abondano,T. Grimmig,A. Bührig-Polaczek,M. Wu,A. Ludwig.Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model[J].中国有色金属学会会刊:英文版,2005,15(2):389-394. 被引量:1
  • 2Ohno A. Solidification-The Separution Theory and its Pructical Applications. Berlin: Springer-Verlag, 1987:15
  • 3Flemings M C. Solidification Processing. New York:McGraw-Hill, 1974:1
  • 4Campbell J. Castings. Oxford: Butterworth-Heinemann,1991:8
  • 5Kaempfer Th U, Rappaz M. In: Sahm P R, ed, Proc 9th Conf on Modeling of Casting, Welding and Advanced Solidification Processes, Aachen, TMS, 2000:640
  • 6Ueno K, Nishita T, Kamiyama H. J Magn Magn Mater,1999; 201:281
  • 7Ehlen G. PhD Thesis, Aachen University of Technology,Aachen, Germany, 2004
  • 8Tagawa T. ISIJ Int, 2005, 45:954
  • 9Ni J, Beckermann C. Metall Trans, 1991; 22B: 349
  • 10Beckermann C, Viskanta R. Appl Mech Rev, 1993; 46(1):1

共引文献20

同被引文献68

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部