摘要
研究了化学成分对金属陶瓷硬度和抗弯强度的影响，结果表明，Mo含量在15％、WC含量在10％时硬度最高；随WC加入量的增加．抗弯强度呈现单调增加的趋势；组织中加入NbC、TaC时．随加入量的增加．抗弯强度呈单调下降趋势。
The effect of chemical composition on the hardness and bending strength of Ti(C,N) based cermets has been studied. The results have shown that the cermets containing 15% molybdenum and 10% tungsten carbide has the highest hardness ralue. With the increase of content of tungsten carbide .the bending strength increases monotonically. However,with the in-crease of NbC,TaC and (Nb,Ta)C.the bending strength decreases continuously.
出处
《硬质合金》
CAS
1999年第4期206-209,共4页
Cemented Carbides
基金
华中理工大学模具技术国家重点实验室基金
