期刊文献+

高长径比硼酸镁晶须的制备及生长机理研究 被引量:9

Preparation and Growth Mechanism of Magnesium Borate Whiskers with High Aspect Ratio
下载PDF
导出
摘要 以六水氯化镁和硼砂为原料,以氯化钠、氯化钾作为助熔剂,通过熔盐法制备出长为200~800μm,最大长径比为250,品质均匀的硼酸镁晶须.采用XRD分析、光学显微和SEM观察,研究产物的结构和形貌,并研究不同n(B)/n(Mg)、反应温度和时间对硼酸镁晶须生长过程及质量的影响,结果表明,反应的最佳条件是n(B)/n(Mg)=3:1、反应温度为900℃、恒温时间为6h.根据XRD分析,表明Mg2B2O5晶须的生成经过中间产物方硼石Mg3B7O13Cl的转化过程,晶须生长需要一个富硼的环境.晶须的生长机理符合L-S机理. Magnesium borate whiskers were prepared by molten salt method using MgCl2?6H2O and Na2B4O7?10H2O as raw materials,KCl and NaCl as fluxes.The lengths of the above whiskers varied from 200μm to 800 μm,and the maximum aspect ratio reached 250.The produced samples were characterized by X-ray diffraction(XRD),microscope and scanning electron microscope(SEM).The effects of n(Mg)/n(B),reaction temperature and reaction time on the whisker growth process and product quality were explored.It was found that the best operating parameters of n(Mg)/n(B),reaction temperature and reaction time were 3.0,900 ℃ and 6h,respectively.According to the XRD analysis,Mg3B7O13Cl is the intermediate product,and the growth of Mg2B2O5 whiskers needs a boron-enriched environment.The whisker growth process agrees to the liquid-solid(L-S) mechanism.
出处 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2011年第4期364-368,共5页 Journal of Inorganic Materials
基金 上海市重点学科建设项目(B506) 上海市自然科学基金(09ZR147900)~~
关键词 硼酸镁晶须 助熔剂法 n(B)/n(Mg) L-S机理 Mg2B2O5 whiskers molten salt method n(B)/n(Mg) L-S mechanism
  • 相关文献

参考文献15

二级参考文献158

  • 1张冰,曹传宝,许亚杰,朱鹤荪.熔盐法合成莫来石晶须[J].无机化学学报,2005,21(2):277-280. 被引量:30
  • 2李昱,张孝彬,徐军明,陶新永,陈飞,刘芙.镁钼氧化物催化剂制备多壁纳米碳管的初步研究[J].无机材料学报,2005,20(1):71-76. 被引量:6
  • 3夏树屏,王继顺,黄继芬,陈若愚.添加剂对提高氯氧镁水泥耐水性的研究[J].海湖盐与化工,1994,23(6):18-22. 被引量:13
  • 4周相廷,张兴利,陈汝芬,施民梅.氧化镁晶须的制备[J].河北师范大学学报(自然科学版),1997,21(1):76-82. 被引量:11
  • 5隗学礼.第三届全国粉工体工程学术会议论文集[M].,1994.28.
  • 6戴长虹.电场电炉[P].中国 实用新型专利公报 ZL97232307.4.1998.3.
  • 7SHARMA S C, ANAND B, KRISHNA M. Evaluation of sliding wear behaviour of feldspar particle-reinforced magnesium alloy composites[J]. Wear, 2000, 241: 33-40.
  • 8LIM C Y H, LEO D K, ANG J J S, GUPTA M. Wear of magnesium composites reinforced with nano-sized alumina particulates[J]. Wear, 2005, 259: 620-625.
  • 9SAHIN Y, MURPHY S. Wear performance of aluminium alloy composites containing unidirectionally-oriented silicon carbide coated boron fibers [J]. Wear, 1996, 197(1/2): 248-254.
  • 10WU S Q, WANG H Z, TJONG S C. Mechanical and wear behavior of an Al/Si alloy metal-matrix composite reinforced with aluminosilicate fiber[J]. Composites Science and Technology, 1996, 56(11): 1261-1270.

共引文献125

同被引文献142

引证文献9

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部