期刊文献+

T型接头多次补焊焊缝的应力分析 被引量:3

The Stress Analysis of T Shape Multi as welded Joints Weld Bead
下载PDF
导出
摘要 分析了多次补焊对T型接头焊缝处应力集中系数的影响,利用Nishida 公式计算出焊趾应力集中系数。 The article analyses the effect on the stress concentration factors of T shape weld bead by multi as welded. Based on Nishida formula the stress concentration factors of weld toe is calculated. The relation of the stress concentration factor between the times of multi as welded is found.
出处 《郑州纺织工学院学报》 1999年第4期53-56,共4页 Journal of Zhengzhou Textile Institute
关键词 补焊 应力集中 T型接头 焊缝 as welded, weld bead, stress concentration factor
  • 相关文献

参考文献4

  • 1中国船级社.海上移动平台入级与建造规范[M].北京人民交通出版社,1992..
  • 2郑修麟.材料的力学性能[M].西安:西北工业大学出版社,1994..
  • 3郑州机械研究所焊接室.TIG熔修提高管点疲劳强度的研究[M].郑州:郑州机械研究所,1986..
  • 4天津大学焊接教研室.金属熔焊原理及工艺[M].北京:机械工业出版社,1979..

共引文献8

同被引文献19

  • 1陈勇,余天庆,熊健民.T型焊接接头焊接温度场的确定[J].湖北工业大学学报,1999,19(4):29-32. 被引量:3
  • 2薛小龙,桑芝富,朱加贵.多道间断焊T型接头的数值模拟[J].压力容器,2004,21(11):27-31. 被引量:31
  • 3汪建华,钟小敏,戚新海.管板接头三维焊接变形的数值模拟[J].焊接学报,1995,16(3):140-145. 被引量:23
  • 4-.自升式一冶桩腿裂纹补焊工艺和平台用高强度钢多次补焊的判废标准/科研项目建议书[M].机械部郑州机械研究所,中国科学院力学研究所,1995..
  • 5陈楚 汪建华 杨洪庆.非线性焊接热传导的有限元分析和计算.焊接学报,1983,4(3):139-147.
  • 6Hicks D J.Guidelines for welding on pressurized pipe[J].Pipeline and Gas Journal,1983,210(3):17 ~ 19
  • 7Dong P,Hong J K,Rogers P.Analysis of residual stresses in Al-Li repair welds and mitigation techniques[J].Welding Journal,1998 (11):439 ~ 445
  • 8Dong P,Brust F W.Welding residual stresses and effects on fracture in pressure vessel and piping components:a millennium review and beyond[J].ASME Journal of Pressure Vessel Technology,2000,122(8):329~338
  • 9Dong P,Zhang J,Bouchard P J.Effects of repair weld length on residual stress distribution[J].ASME Journal of Pressure Vessel Technology,2002,124 (2):74 ~ 80
  • 10Bonifaz E A.Finite element analysis of heat flow in single-pass arc welds[J].Welding Journal,2000,(5):121 ~ 125

引证文献3

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部