期刊文献+

LED筒灯复合结构热管散热器的数值模拟 被引量:5

Numerical Simulation of Coupled Heat Pipe Heat Sink for LED Downlights
下载PDF
导出
摘要 为解决LED筒灯使用单纯自然对流散热扩散热阻过大、温度分布不均的问题,提出一种基于平板热管和热虹吸管的复合结构热管散热器,并用数值模拟的方法研究了热功率、翅片高度、翅片数目、辐射换热对该散热器性能的影响。模拟结果表明应用于LED筒灯的复合结构热管散热器的热阻随着热功率的增加而减小,翅片高度和翅片数目存在一个最优值,使得散热器温度和热阻最小,自然对流情况下不可忽视辐射换热的作用。 A coupled heat pipe heat sink based on flat heat pipe and thermosyphon was proposed for LED downlights to overcome high thermal spreading resistance and nonuniform temperature under pure natural convection.Numerical study was performed to evaluate the effect of fin height,number of fins,heating power and radiation heat transfer on the heat dissipation performance of the heat sink.The results indicated that the thermal resistance of the heat sink decreased with the increase of the heating power.There is an optimum fin height and number of fins that give the minimum temperature and thermal resistance of the heat sink.Radiation heat transfer could not be ignored for the coupled heat pipe heat sink under natural convection.
出处 《半导体光电》 CAS CSCD 北大核心 2011年第2期224-227,共4页 Semiconductor Optoelectronics
关键词 筒灯 LED 热管 散热 翅片 downlight LED heat pipe heat dissipation fin
  • 相关文献

参考文献11

  • 1Cheng Ting, Luo Xiaobing. Thermal analysis and optimization of multiple LED packaging based on a general analytical solution[J]. International Journal of Thermal Sciences, 2010, 49(1) : 196-201.
  • 2Christensen A, Graham S. Thermal effects in packaging high power light emitting diode arrays[J]. Appl. Thermal Engineering, 2009, 29(23): 364-371.
  • 3刘一兵,黄新民,刘国华.基于功率型LED散热技术的研究[J].照明工程学报,2008,19(1):69-73. 被引量:45
  • 4Deng Yueguang, Liu Jing. A liquid metal cooling system for the thermal management of high power LEDs[J]. International Communications in Heat and Mass Transfer, 2010, 37(7):788-791.
  • 5Yan Lai, Cordero N, Barthel F, et al. Liquid cooling of bright LEDs for automotive applications[J]. Appl. Thermal Engineering, 2009, 29(5-6) : 1239-1244.
  • 6Wang Nan, Wang Chang-hong, Lei Jun-xi, et al. Numerical study on thermal Management of LED packaging by using thermoelectric cooling [C]// International Conference on Electronic Packaging Technology & High Density Packaging, 2009: 433- 437.
  • 7郑同场,李炳乾,夏正浩.半导体制冷的大功率LED模组散热模拟[J].半导体光电,2010,31(2):210-212. 被引量:8
  • 8Yu S-H, Lee K-S. Natural convection around a radial heat sink[J]. International Journal of Heat and Mass Transfer, 2010, 53(13-14): 2935-2938.
  • 9Kim L, Choi J H, Jang S H,et al. Thermal analysis of LED array system with heat pipe[J]. Thermochimica Acta, 2007, 455(1/2): 21-25.
  • 10Kang Shungwen, Tai Mengchang, Weng Mingtai, et al. Development of thermal spreading technology nowadays [ C ]//International Microsystems, Packaging, Assembly and Circuits Technology Conference, 2009: 328-335.

二级参考文献19

共引文献50

同被引文献30

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部