期刊文献+

Microstructure-based analysis of fatigue behaviour of Al-Si-Mg alloy 被引量:1

基于微结构变化的Al-Si-Mg合金的疲劳行为分析(英文)
下载PDF
导出
摘要 The effects of microstructural characteristics on the fatigue behavior in Al-Si-Mg alloy were investigated. The dislocation substructures of Al-Si-Mg alloy were observed by transmission electron microscopy (TEM). Dislocation evolution process of α(Al) matrix with [011] orientation of Al-Si-Mg alloy specimens was observed during fatigue process under different stress amplitudes and cycles. The results indicate that dislocation structure is closely dependent on stress amplitudes, and the density of dislocation in failure specimens increases with increasing stress amplitudes. The results show that Mg2Si and secondary silicon phase could have a strong hindrance effect on the movement of dislocations during the fatigue process. The fatigue behavior is strongly dependent on the microstructure of material. 研究Al-Si-Mg合金的微结构对其疲劳性能的影响。利用透射电子显微镜观察不同条件下Al-Si-Mg合金中位错的结构,对同一应力幅下不同循环周次试样的基体(011)面进行位错观察。结果表明,Al-Si-Mg合金的位错结构随应力幅的变化而变化,并具有一定的规律性;Mg2Si与二次硅相对位错运动具有强烈阻碍作用。材料的疲劳行为强烈地依赖于的材料的微观结构变化。
出处 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第3期443-448,共6页 中国有色金属学报(英文版)
基金 Project (2007CB714704) supported by the National Basic Research Program of China Project (50771073) supported by the National Natural Science Foundation of China
关键词 Al-Si-Mg alloy DISLOCATION MG2SI secondary silicon phase Al-Si-Mg合金 位错 Mg2Si 二次硅相
  • 相关文献

参考文献5

二级参考文献48

  • 1万建新,全长庚.铝合金铸件壁厚对机械性能的影响[J].特种铸造及有色合金,1994,14(2):1-4. 被引量:5
  • 2赵鸿.铝在汽车上的应用[J].汽车工艺与材料,1997(1):19-24. 被引量:34
  • 3李云卿,Proc of the IV Conference of Asian-Pacific Congress on Strength Evolution,1991年
  • 4Ran Guang, Zhou Jing'en. Metallographic characterization of porosity in a cast aluminum alloy a356-T6 [J]. Materials Science Forum, 2007,546-549 : 989-994.
  • 5Zhou J E, Chinese J. Fatigue crack initiation and propagation from notches[J].Mech. Eng, 1988,1:226-232.
  • 6Basquin O H. The exponential law of endurance tests [A].Proc. ASTM, Vol 10, Oart 11,1910, ASTM, West Conshohocken, PA : 625.
  • 7Manson S S. Discussion of reference 18 [ J ]. Trans. ASME, J. Basic Eng, 1962,84(4) :537.
  • 8Barsom J M, Rolfe S T. Fracture and fatigue control in srtuctures(3rd ed) [ M ]. ASTM, 1999 : 196-197.
  • 9Stephens R I, et al. Metal fatigue in engineering (2nd ed ) [ R]. John Wiley and Sons,inc. ,2001:144-156.
  • 10Jambor A, Beyer M. New cars-new materials[J]. Materials and Des ign, 1997,18 ( 4 -6 ) : 203-209.

共引文献18

同被引文献12

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部