期刊文献+

丙交酯纯化方法的改进 被引量:3

Improvement of Purification Method for Lactide
下载PDF
导出
摘要 丙交酯的纯度决定了聚乳酸合成的质量。提供了一种重结晶纯化丙交酯的改进方法,该方法具有快速、经济、产品纯度高的特点。以熔点和熔程测定化合物纯度,并对最终产品进行了红外光谱表征。结果表明,重结晶法混合溶剂乙酸乙酯与乙醇的体积比为1:4,结晶温度为40℃得到高纯度的丙交酯。 Molecular mass of polylactide was determined by the purity of lactide,which is often obtained by the recrystallization method.An improved recrystallization method was presented in the article,which is of higher purity,quickness and economy.Melting point measurement and IR were applied to check the purity of products.The ethyl acetate and ethanol volume ratio of 1:4 was selected as optimal recrystallization solvent and the recrystallization temperature is 40℃ to get high purity lactide.
作者 张宁 张俊杰
出处 《河北理工大学学报(自然科学版)》 CAS 2011年第2期115-117,132,共4页 Journal of Hebei Polytechnic University:Social Science Edition
关键词 丙交酯 重结晶 方法改进 纯化 Lactide Recrystallization Purification
  • 相关文献

参考文献7

二级参考文献27

  • 1赵洁,全大萍,廖凯荣,伍青.含不同侧氨基密度的PLGA-(ASP-Diol)_x-PLGA共聚物的合成与表征[J].高等学校化学学报,2005,26(8):1570-1573. 被引量:2
  • 2孙晓红,汪群慧,马睿,程桂石,赵莹.用厨房垃圾的乳酸发酵液合成丙交酯的研究[J].高校化学工程学报,2005,19(6):859-863. 被引量:5
  • 3韩宁,王鹏,张英民,史书杰.D,L-丙交酯提纯溶剂的选择[J].过程工程学报,2007,7(2):306-309. 被引量:4
  • 4WANGYuan-liang ZHAOJian-hua.重庆大学学报 (Journal Chongqing University),1996,19(1):112-112.
  • 5FANChang-lie LIBing LIUZhen-hua.高等学校化学学报 (Chemical Journal Chinese University),1995,16(6):971-971.
  • 6ZHANGZhen-yu SUYi-hua ZHANGYan-hong.黑龙江大学自然科学学报(Journal Heilonjiang University, Nature Science Edition),15(1):110-110.
  • 7LUZe-jian LIAOKai-rong LIHong-quan.中山大学学报(自然科学版) (Journal Zhongshan University, Nature Science Edition),38(5):36-36.
  • 8SONGMou-dao ZHUJie-liang ZHANGBang-hua.高分子学报 (Acta Polymerica Sinica),1998,4:454-454.
  • 9Vink E T H, Rabago K R, Glassner D A et al. Applications of life cycle assessment to NatureWorksTM polylactide (PLA) production [J]. Polym Degrad Stabil, 2003, 80: 403-419.
  • 10Kulkarni R K, Pani K C, Neuman C et al. Polylactic acid for surgical implants [J]. Arch Surg, 1966, 93: 839-843.

共引文献58

同被引文献51

  • 1徐溢,柳胜春.合成丙交酯中微量水分分析[J].化学研究与应用,1995,7(4):434-436. 被引量:5
  • 2陈佳,王远亮.合成丙交酯的催化剂研究进展[J].化学研究与应用,2007,19(4):358-360. 被引量:6
  • 3王俊凤,张军,张学龙,李素芹.聚乳酸合成的研究进展[J].化工时刊,2007,21(6):51-56. 被引量:13
  • 4James L.Large-scale production, properties and commercial applications of polylactic acid polymers[J].Polymer Degradation and Stability, 1998, 59:145-152.
  • 5Muller M, Hess J, Schnell W, et al.Meso-lactide, processes for preparing it and polymers and copolymers produced therefrom:US, 4983745[P].1991-01-08.
  • 6Ohara H, Ogaito M.Method for producing lactide and apparatus used therefor:US, 5801255[P].1998-09-01.
  • 7Masaki N, Hisashi O.Thermal catalytic depolymerization of poly (L-lactic Acid) oligomer into L, L-lactide:Effects of Al, Ti, Zn and Zr compounds as catalysts[J].Chem.Pharm.Bull., 1999, 47(4):467-471.
  • 8Gruber P R.Hall E S, Kolstad J J, et al.Continuous process for the manufacture of lactide and lactide polymers:US, 6326458[P].2001-12-04.
  • 9Bhaskar Bhairavnath Idage, Bhaskar Susheela Idage, Sivaram Swaminathan.Improved process for the preparation of l-lactide of high chemical yield and optical purity:WO, 2011104728(A1)[P].2011-09-01.
  • 10Philippe Coszach, Pierre-Antoine Mariage.Method for obtaining lactide:US, 8592609[P].2013-11-26.

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部