摘要
通过对离心式给水泵的内特性的分析与建模,完成在VC++/MATLAB程序下对离心式给水泵的启动过程的内特性曲线模拟系统,通过MATLAB完成对离心式给水泵内特性的数学建模,并计算出初始参数,再用VC++程序计算出模拟曲线所需要的参数,并采用了VC++设计MFC显示界面,完成离心式给水泵在启动过程中的稳态运行下内特性的过渡过程模拟。
Through the analysis and simulation of centrifugal type driven water pump based on interior characteristics,internal characteristic curve simulated system was completed under the procedure of VC++/MATLAB.Through the mathematical modeling by MATLAB,initial parameters were calculated and the those needed in the simulation curve were calculated by VC+programme.The interface designed by MFC was adopted,thus the transient process simulation was finished in the process of starting.
出处
《黑河学院学报》
2011年第1期124-128,共5页
Journal of Heihe University
关键词
离心泵
内特性
动态模拟
核动力仿真
driven water pump
interior characteristics
dynamic simulation
nuclear-powered simulation