基于Labview的液压支架四连杆机构参数优化设计

Optimization Design of Four Bar Linkage Parameter for Hydraulic Support Based on Labview

基于Labview开发平台开发出的四连杆机构优化设计系统,通过输入各种参数,可得出支架在每个高度时各部件的受力大小,从而找出每个部件受力最大时的相应高度,在进行强度校核时,按此最大力和相应的高度对支架进行校核。

By four-bar mechanism,can make the end of the support＇s top beam ran a hyperbola-like track,and improve the performance of the management of roof accroding this,design system based on Labview was developed,then iuput all the must needed parameters,it will give us the force value of every component at every support height.By this way,the corresponding support height what find easily is gotten.When make strength checking,can use this max-force and the corresponding height.