摘要
采用水热法制备了ZnS∶Mn,Cu电致发光材料,利用透射电镜对发光材料的结构和形貌进行表征,并且探讨了Cu2+、Mn2+掺杂量和反应温度对ZnS∶Mn,Cu发光材料亮度的影响。结果显示,随着Cu2+、Mn2+掺杂量的增加,发光材料的亮度也随之增加,但对于Cu2+、Mn2+掺杂都存在最佳值,当Cu2+掺杂量0.2%,Mn2+掺杂量4%,温度150℃时,得到的电致发光材料亮度较高,粒径约10nm左右。
The electroluminescent material of ZnS∶Mn,Cu was synthesized by hydrothermal method.The structure and feature of ZnS∶Mn,Cu were studied by transmission electron microscopy(TEM),the influences of Cu^(2+),Mn^(2+) doping and temperature on luminescence intensity were discussed as well.The results show that the material with the highest brightness is obtained at 150℃ and the doping dose of Mn^(2+) is 4%,Cu^(2+) is 0.2%,and the grain size is about 10nm.
出处
《材料科学与工程学报》
CAS
CSCD
北大核心
2011年第1期128-130,共3页
Journal of Materials Science and Engineering
基金
河北农业大学非生命学科和新兴发展学科基金项目(FS200909)
保定市科技局科研资助项目(09ZF072)