摘要
采用经过不同球磨时间制备的硼硅玻璃与氧化铝复合,低温烧结制备了硼硅玻璃/氧化铝系复相陶瓷。利用XRD和SEM,研究了硼硅玻璃粉料球磨时间对流延成型及所制复相陶瓷的烧结性能、介电性能(10 MHz)的影响。结果表明:随着球磨时间增加,粉料粒径减小,硼硅玻璃复相陶瓷烧结温度降低,密度增加,介电常数和介质损耗降低。球磨90 min在850℃烧结的试样性能较佳:密度为3.22 g.cm–3,10 MHz下的相对介电常数和介质损耗分别为7.92和1.2×10–4。
Low-temperature sintering borosilicate glass composite ceramics were prepared by the borosilicate glass powders with different grinding time and alumina powders.The effects of grinding time on the tape casting,sintering properties and dielectric properties(at 10 MHz) of prepared composite ceramic were investigated by XRD and SEM.The results show that the particle sizes,sintering temperature,permittivity and dielectric loss all decrease,while the density increases,as the grinding time increases.The sample grinded for 90 min and sintered at 850 ℃ possess better properties: a density of about 3.22 g·cm–3,a relative permittivity of 7.92 and a dielectric loss of 1.2×10–4 at 10 MHz.
出处
《电子元件与材料》
CAS
CSCD
北大核心
2011年第6期5-8,共4页
Electronic Components And Materials
基金
国家"863"计划资助项目(No.2007AA03Z0455)
关键词
硼硅玻璃
球磨时间
性能
borosilicate glass
grinding time
property