摘要
所谓平台网纹珩磨,就是通过珩磨在缸孔表面形成细小的沟槽,这些沟槽有规律地排列形成网纹,再由专门的珩磨工艺削掉沟槽的尖峰,形成微小的平台。平台网纹珩磨在缸孔表面形成的这种特殊结构有如下优点:
出处
《汽车与配件》
2011年第19期36-38,共3页
Automobile & Parts
同被引文献12
-
1Pawlus P. The study of cylinder liner plateau honing process [ J ]. Journal. of Materials Processing Technology. 2009, 209 ( 20 ) : 6078 - 6086.
-
2Aurich J C, Braun O, Wamecke G, et al. Development of a Super abrasive Grinding wheel With Defined Grain Structure Using Kine-matic Simulation [ J ]. CIRP Annals-Manufacturing Technology, 2003, 52(1) : 275 -280.
-
3Burkhard G, Rehsteiner F, Schumacher B. High Efficiency Abra- sive Tool for Honing [ J]. CIRP Annals-Manufacturing Technolo- gy, 2002, 51 ( 1 ) : 271 - 274.
-
4Yoshio Ichida. Mechanical. Properties and grinding performance of ultrafine crystalline CBN abrasive grains [ J ]. Diamond and Relat- ed Materials, 2008, 17 (7 -1) : 1791 -1795.
-
5J. Michalski and P. Wos. The effect of cylinder liner surface to- pography on abrasive wear of piston cylinder assembly in combus- tion engine [J]. Wear. 2011,271(3-4): 582-589.
-
6P Pawlus, J Michalski. Simulation of cylinder zero-wear process [J].Wear. 2009, 266(1 -2) : 208-213.
-
7Quan Cheng, Jie Sun, Jian-qing Wang et al. Study of Cylinder Liner Based on Ultrasonic Plateau Honing[ J ]. Advanced Materials Research. 2011, 311-313:2200 -2203.
-
8Quan Cheng, Jie Sun, Xi-jing Zhu. Mechanism research on cylin- der liner groove of. The ultrasonic plateau-honing [ J ]. Advanced Materials Research, 2010, 135 : 107 - 110.
-
9王安平,吕梓琴,李光瀛,叶虎年.平顶网纹缸套的试验研究[J].华中理工大学学报,1998,26(A02):34-37. 被引量:2
-
10商成超,赵兴龙.发动机缸孔珩磨网纹评定及常见网纹问题解析[J].装备制造技术,2012(4):134-136. 被引量:4
引证文献3
-
1成全,祝锡晶,王建青.超声平台珩磨机理分析[J].机械设计与研究,2012,28(4):90-91. 被引量:1
-
2柴泽琳,吕玉山,孙金升,施博文.磨粒有序化排布油石珩磨表面形貌仿真[J].机械工程师,2019(1):66-71.
-
3张庆,王力谦,张明明,郭荣辉.发动机缸孔平台网纹珩磨技术研究[J].汽车实用技术,2021,46(13):121-124. 被引量:2
二级引证文献3
-
1张艳岗,郭巨寿,张雪冬,苏铁熊,董家广.精密孔珩磨加工仿真分析及工艺参数优选[J].组合机床与自动化加工技术,2017(2):142-145. 被引量:3
-
2韩昆朋.柴油机缸套变形分析与改进设计[J].机械设计与制造,2023(7):227-231.
-
3程世昌,林琳,钱进,谢达,王洪兵.船用柴油机气缸套内孔平台网纹珩磨加工工艺[J].柴油机,2024,46(3):56-60.
-
1贾秀杰.金刚石平台网纹珩磨工艺及加工参数分析[J].磨料磨具通讯,2006(5):11-14.
-
2陶前昭,李胜柱,蔚兴建.缸孔平台网纹珩磨工艺[J].现代制造工程,2002(3):37-38. 被引量:7
-
3贾秀杰,梁明柱,李剑峰.金刚石平台网纹珩磨工艺及加工参数分析[J].工具技术,2006,40(4):61-64. 被引量:4
-
4王德山,王世明,陈应书.船用柴油机气缸套平台网纹珩磨工艺研究[J].造船技术,2012,40(3):41-43. 被引量:1
-
5王平吉.浅谈沥青路面早期破坏原因[J].科技信息,2011(21):329-329. 被引量:2
-
6高伟.连徐高铁:助推江苏高铁路网全面形成[J].世界轨道交通,2016(12):28-28.
-
7高德录.缸孔的平台网纹珩磨工艺[J].汽车制造业,2009(1):25-26.
-
8李佳,胡劲松.发动机缸孔平台网纹珩磨技术[J].现代零部件,2013(2):64-67. 被引量:3
-
9单冲程珩磨工艺VS多冲程珩磨工艺[J].汽车制造业,2004(9):36-38.
-
10司圣春.铸铁缸体缸孔珩磨工艺及检测技术探究[J].金属加工(冷加工),2016(19):12-14. 被引量:1