摘要
The mechanism of the increasing of A-TIG welding penetration is studied by using the activating flux we developed for stainless steel, The effect of fluxon the flow and temperature fields of weld pool is simulated by the PHOENICS software, It shows that without flux, the fluid flow will be outward along the surface of the weld pool and then down, resulting in a flatter weld pool shape. With the flux, the oxygen, which changes the temperature dependence of surface tehsion grads froma negative value toa positive value, can cause significant changes onthe Weld penetration. Fluid flow will be inward along the surface of the weld pool toward the center and then down. This fluid flow pattern efficiently transfers heat to the weld root and produces a relatively deep and narrow weld.This change is the main cause of penetration increase. Moreover, arc construction can cause the weld width to become narrower and the penetration to become deeper, but this is not the main cause of penetration increase. The effects Of flux on fluid flow of the weld pool surface and arc profiles were observed in conventiOnai TIG welding and in A-TIG welding by using high-speed video camera; The fluid flow behavior was visualized in realtime scale by micro focused X-ray transmission video observation system. The result indicated that stronger inward fluid flow patterns leading to weld beads with narrower width and deeper penetration could be apparently identified in the case of A-TIG welding.The flux couldchange the direction of fluid flow i-n welding pool. It has a good agreement with the simulation result.
The mechanism of the increasing of A-TIG welding penetration is studied by using the activating flux we developed for stainless steel, The effect of fluxon the flow and temperature fields of weld pool is simulated by the PHOENICS software, It shows that without flux, the fluid flow will be outward along the surface of the weld pool and then down, resulting in a flatter weld pool shape. With the flux, the oxygen, which changes the temperature dependence of surface tehsion grads froma negative value toa positive value, can cause significant changes onthe Weld penetration. Fluid flow will be inward along the surface of the weld pool toward the center and then down. This fluid flow pattern efficiently transfers heat to the weld root and produces a relatively deep and narrow weld.This change is the main cause of penetration increase. Moreover, arc construction can cause the weld width to become narrower and the penetration to become deeper, but this is not the main cause of penetration increase. The effects Of flux on fluid flow of the weld pool surface and arc profiles were observed in conventiOnai TIG welding and in A-TIG welding by using high-speed video camera; The fluid flow behavior was visualized in realtime scale by micro focused X-ray transmission video observation system. The result indicated that stronger inward fluid flow patterns leading to weld beads with narrower width and deeper penetration could be apparently identified in the case of A-TIG welding.The flux couldchange the direction of fluid flow i-n welding pool. It has a good agreement with the simulation result.