期刊文献+

金字塔形栅格材料的静态压缩力学性能 被引量:2

Static Compressive Properties of Pyramidal Lattice Material
下载PDF
导出
摘要 在金字塔形栅格材料压缩试验的基础上,研究了其单轴压缩应力-应变曲线、吸能能力和吸能效率。结果表明:金字塔形栅格材料单轴压缩应力-应变曲线呈现线弹性变形阶段、弹塑性阶段、软化阶段、致密化阶段四个阶段;与泡沫铝合金的压缩性能比较,其压缩强度更高,吸能能力更强。 Based on the compressive test of pyramidal lattice material,the stress-strain curves,energy absorption capacity and energy absorption efficiency under uniaxial compression condition were investigated.The compressive stress-strain curve of pyramidal lattice material consists of four distinct regions: linear elasticity region,plastic collapse region,softening region and densification region.Compared with Al alloy foam,the compressive strength of pyramidal lattice material is relatively higher,the energy absorption capacity is stronger.
出处 《热加工工艺》 CSCD 北大核心 2011年第10期27-29,共3页 Hot Working Technology
基金 江西省教育厅科技项目(GJJ10207) 国家重点基础研究发展计划(2006CB601201)
关键词 金字塔形栅格材料 压缩应力-应变曲线 吸能能力 pyramidal lattice material compressive stress-strain curves energy absorption capacity
  • 相关文献

参考文献10

  • 1Nathan Wicks, John Hutchinson W. Optimal truss plates[J]. International Journal of Solids and Structures,2001,38 (30): 5165-5183.
  • 2Chiras S, Mumm D R, Evans A G, et al. The structural performance of near-optimized truss core panels [J]. International Journal of Solids and Structures,2002,39(15): 4093-4115.
  • 3Yuki Sugimttra. Mechanical response of single-layer tetrahedral truss es under shear loading [J]. Mechanics of Materials, 2004,36(8): 715-721.
  • 4Haydn Wadley N G, Fleck N A, Evans A G. Fabrication and structural performance of periodic cellular metal sandwich structures [J]. Composites Science and Technology,2003,63 (16) :2331-2343.
  • 5Tian Y S, Lu T J. Optimal design of compression corrugated panels[J]. Thin-walled Structures ,2005,43(3) :477-498.
  • 6Wallach J C, Gibson L J. Mechanical behavior of a three-dimensional truss material [J]. International Journal of Solids and Structures, 2001,38(40): 7181-7196.
  • 7Nathan Wicks, John Hutchinson W. Performance of sandwich plates with truss cores[J]. Mechanics of Materials,2004,36(8): 739-751.
  • 8Zok F W, Waltner S A, Wei Z, et al. A protocol for characterizing the structural performance of metallic sandwich panels:application to pyramidal truss cores [J]. International Journal of Solids and Structures, 2004,41 (22) : 6249-6271.
  • 9王展光,尚金堂,何思渊,何德坪,单建.球形孔泡沫铝合金压缩性能与理论模型[J].材料热处理学报,2006,27(6):129-133. 被引量:7
  • 10Ashby M F, Evans A G, Fleck N A, et al. Metal Foams:A Design Guide [M]. Boston:Butterworth Heinemann Press, 2000. 60.

二级参考文献4

共引文献6

同被引文献12

引证文献2

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部