期刊文献+

硅生长的几种形态与机制 被引量:1

Several Morphology Forms and Growth Mechanisms of Primary Silicon
下载PDF
导出
摘要 采用Al-20%Si合金为原料,在室温条件下直接浇注试样。试样经腐蚀后在扫描电镜下观察初晶硅的生长迹线,并对其生长迹线进行了研究,结果表明,初生硅的生长机制为连续生长。 Al-20% Si alloy was selected in the work, and direct casting at room temperature. After the samples was etched, the growth lines of the primary silicon were observed by SEM, and the growth behavior of the primary silicon was studied in detail. The results show that the growth behavior of primary Si is continuous growth.
出处 《热加工工艺》 CSCD 北大核心 2011年第11期39-41,共3页 Hot Working Technology
关键词 初生硅相 生长迹线 铝硅合金 primary Si phase track lines Al-Si alloy
  • 相关文献

参考文献16

二级参考文献29

共引文献309

同被引文献9

  • 1Shi Z L, Lee J, Zhang D, et al. The passive-oxidized behavior of SiC particles and their jointing characteristics[J]. Journal of Materials Processing Technology, 2001,110 : 127-131.
  • 2Urena A, Martinez E E, Rodrigo P, et al. Oxidation treatments for SiC particles used as reinforcement in aluminium matrix composites [J]. Composites Science and Technology, 2004,64 : 1843-1854.
  • 3Lee J C, Ahn J P, Shi Z L, et al. Methodology to design the interfaces in SiC/Al composites[J]. Metallurgical and Materials Transaction, 2001, A32 : 1541-1549.
  • 4Kim Y, Lee J C. Processing and interfacial bonding strength of 2014 Al matrix composite reinforced with oxidized SiC particles [J]. Materials Science and Engineering,2006,A420: 8-12.
  • 5Ren S B, He X B, Qu X H, et al. Effect of controlled interfacial reaction on the microstructure and properties of the SiCp/Al composites prepared by pressureless infiltration [J]. Journal of Alloys and Compounds. 2008.455:424-431.
  • 6Lee J C, Ahn J P, Shim J H, et al. Control of the interface in SiC/Al composites[J]. Scripta Materialia,1999,41(8):895-900.
  • 7Shi Z L, Ochiai S, Gu M, et al. The formation and thermostability of MgO and MgAl2O4 nanoparticles in oxidized SiC particle-reinforced Al-Mg composites [J]. Applied Physical, 2002,A74 : 97-104.
  • 8杨序钢,吴琪琳.拉曼光谱的分析与应用[M].北京:国防工业出版社,2008:34-62.
  • 9郑喜军,米国发.碳化硅颗粒增强铝基复合材料的研究现状及发展趋势[J].热加工工艺,2011,40(12):92-96. 被引量:55

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部