摘要
重型车辆具有重心高,装载量大,高宽比相对乘用车较大等特点,导致其侧翻稳定极限较低,极易发生侧翻事故。建立重型车辆侧翻预测模型,利用车辆实车试验数据离线辨识技术,辨识出3自由度车辆模型中的关键参数,然后利用改进后的车辆模型进行在线侧翻危险预测及控制,实现车辆动态侧翻特性精确预测。在此基础上,将卡尔曼滤波技术融入到改进侧翻预测时间(Time to rollover,TTR)侧翻预警算法中,选取车辆的横向载荷转移率作为侧翻极限判据,根据当前车辆状态预测未来3 s车辆的侧翻危险程度,并实时计算TTR值,一旦TTR值满足侧翻条件,系统自动触发预警装置。利用侧翻预警系统车载试验平台,对侧翻预警控制系统进行验证。侧翻预警场地试验结果表明:所开发的重型车辆侧翻预警系统可以准确有效地进行车辆侧翻危险程度预警,达到预期的开发设计目标。
While the heavy duty vehicle has a high gravity-center,large loads and relatively narrow tread in comparison with the height of vehicle.Therefore the rollover threshold is low;consequently,rollover tends to occur.A real-time rollover prediction model is built,and off-line identification technology is utilized to identify the key parameters of 3-DOF vehicle model.In addition,by using the improved model to carry out on-line rollover prediction and control,thereby realizing the precision prediction of dynamic rollover threat.On this basis,Kalman filter technique is integrated into the improved time to rollover(TTR) algorithm,the lateral load transfer ratio is taken as the condition of rollover threshold,and on the basis of the current vehicle state,the degree of rollover threat in forthcoming three seconds is predicted,and TTR value is calculated in real time.Once the TTR value reaches rollover limit,the system will trigger the warning device automatically.A rollover warning test platform is used to verify the rollover prediction system.The field test results show that the heavy duty vehicle rollover warning system is very effective in prevention of rollover occurrence and attains the expected design object.
出处
《机械工程学报》
EI
CAS
CSCD
北大核心
2011年第10期88-94,共7页
Journal of Mechanical Engineering
基金
国家自然科学基金(51075176)
汽车动态模拟国家重点实验室开放基金(20101103)资助项目
关键词
重型车辆
侧翻预警系统
改进侧翻预测时间算法
Heavy duty vehicle Rollover warning system Improved time to rollover(TTR) algorithm