期刊文献+

双取向硅钢在制备过程各阶段的织构和微结构 被引量:1

Texture and Substructure of Double Oriented Electrical Steels During the Difference Process
下载PDF
导出
摘要 利用X-射线衍射织构分析和线形分析技术测定了交叉轧制双取向硅钢在制备工艺各阶段的织构及微结构,进而探讨了立方织构({100}<001>)的形成过程。通过对实验结果的分析可知,二次冷轧和交叉轧制工艺为立方织构提供了内能优势和有利的形变织构,而低温预退火工艺既强化了立方织构的内能优势,又为立方织构的异常长大提供了有利的组织保证,最终在抑制剂(AlN和MnS)的协同作用下,硅钢在二次再结晶退火后形成了强烈的立方织构。 The texture and substructure of the double oriented electrical steels produced by the cross rolling technology during the difference process has been measured by means of the X-ray texture and diffraction peak profile analysis technology,and research the formation mechanism of cube texture,{100}001.The results show that the dominances of inner energy and deformation texture were supplied by secondary cold rolling and the cross rolling technology and strengthened by pre-annealing at a lower temperature.The pre-annealing has also supplied the second recrystallization with a assurance in microstructure,and as a result,the strong {100}001 texture formed in the 3% grain oriented silicon steel coacted by inhibitor,AlN and MnS,after second recrystallization annealing,and the product had turned into double oriented electrical steels.
出处 《电工材料》 CAS 2011年第2期20-24,共5页 Electrical Engineering Materials
关键词 双取向硅钢 X-射线衍射 织构 微结构 double oriented electrical steels X-ray diffraction texture substructure
  • 相关文献

参考文献4

  • 1何忠智.电工钢[M].北京:冶金工业出版社,1996.118-120.
  • 2藤凤恩,王煜明.X-射线结构分析与材料性能表征[M].北京:科学出版社,1997:156-228.
  • 3李长一,周顺兵,张新仁,黄璞,谢晓心,王志奋.冷轧低碳钢带中各晶体学位向的点阵畸变储能[J].理化检验(物理分册),2006,42(12):595-598. 被引量:4
  • 4董浩 赵宇 喻晓军 等.二次冷轧压下率对无取向电工钢薄带磁性能和织构的影响.电工钢,2009,:36-38.

二级参考文献4

  • 1何忠智.电工钢[M].北京:冶金工业出版社,1996.118-120.
  • 2Matsuo M,Hayami S,Nagashima S.Study of Recrystallization texture formation in cold rolled iron sheets with X-ray diffraction techniques[J].Advances in X-ray Analysis,1971,14:214-230.
  • 3李振川.X射线积分宽度法测定取向硅钢不同位相的晶格畸变储能[J].冶金物理测试,1983,(4):35-45.
  • 4藤凤恩,王煜明.X射线结构分析与材料性能表征[M].北京:科学出版社,1997.156-228.

共引文献9

同被引文献28

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部