期刊文献+

Nonequilibrium Grain Boundary Segregation of Sulfur and Its Effect on Intergranular Corrosion for 304 Stainless Steel 被引量:4

Nonequilibrium Grain Boundary Segregation of Sulfur and Its Effect on Intergranular Corrosion for 304 Stainless Steel
原文传递
导出
摘要 The data obtained by bending tests for intergranular embrittlement after 45 h and 450 h exposure to Strauss solution have been reported for 304 stainless steel. The results show that an embrittlement peak appears at 650℃ for all samples quenched from 1260℃ and then sensitized for 150 h at 480, 565, 650, 730, 815 and 900℃ respectively. The temperature corresponding to the embrittlement peak is decreased to 565℃ when the sensitizing time is prolonged to 1 500 h. In this paper, these data are analyzed with an isothermal kinetic model of nonequilibrium grain boundary segregation, indicating that the embrittlement peak is related to the critical time for nonequilibrium grain boundary segregation of sulfur. The data obtained by bending tests for intergranular embrittlement after 45 h and 450 h exposure to Strauss solution have been reported for 304 stainless steel. The results show that an embrittlement peak appears at 650℃ for all samples quenched from 1260℃ and then sensitized for 150 h at 480, 565, 650, 730, 815 and 900℃ respectively. The temperature corresponding to the embrittlement peak is decreased to 565℃ when the sensitizing time is prolonged to 1 500 h. In this paper, these data are analyzed with an isothermal kinetic model of nonequilibrium grain boundary segregation, indicating that the embrittlement peak is related to the critical time for nonequilibrium grain boundary segregation of sulfur.
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2011年第6期61-66,共6页 钢铁研究学报(英文版)
基金 Item Sponsored by National Natural Science Foundation of China(50771036,51001030)
关键词 stainless steel intergranular corrosion nonequilibrium segregation grain boundary SULFUR stainless steel intergranular corrosion nonequilibrium segregation grain boundary sulfur
  • 相关文献

参考文献25

  • 1Joshi A, Stein D F. Chemistry of Grain Boundaries and Its Re- lation to Intergranular Corrosion of Austenitlc Stainless Steel [J].Corrosion, 1972, 28(9): 321.
  • 2Mahla E M, Nielsen N A. Carbide Precipitation in Type 304 Stainless Steel-An Electron Microscope Study [J]. Trans ASM, 1951, 43: 290.
  • 3Aust K T. Intergranular Corrosion of Austenitic Stainless Steels [J]. Trans AIME, 1969, 245. 2117.
  • 4Aust K T, Armiio J S, Koch E F, et al. Intergranular Corm sion and Mechanical Properties of Austenitic Stainless Steels[J].AsmTransQuart, 1968, 61: 270.
  • 5Barkleit G, John A, Schneider F. Scanning AES and Chemical Investigation of Materials Failure Due to Phosphorus and Sul phur Grain Boundary Segregation in Type AISI 304L Stainless Steel[J]. Materials and Corrosion, 1999, 50: 591.
  • 6Briant C L. Grain Boundary Segregation of Phosphorus in 304L Stainless Steel [J].Metal Trans, 1985, 16A: 2061.
  • 7Briant C L. Grain Boundary Segregation of Phosphorus and Sul fur in Types 304L and 316L Stainless Steel and Its Effect on Intergranular Corrosion in the Huey Test [J]. Metal Trans, 1987, 18A: 691.
  • 8Xu T D, Cheng B Y. Kinetics of Non-Equilibrium Grain Bound- ary Segregation [J]. Prog Mater Sci, 2004, 49(2) : 109.
  • 9McLean D. Grain Boundaries in Metals [M]. London: Oxford Univ Press, 1957.
  • 10Zhang Z L, Lin Q Y, Yu Z S. Non Equilibrium Intergranular Segregation in Ultra Low Carbon Steel [J].Mater Sci Tech, 2000, 16: 305.

同被引文献57

引证文献4

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部