摘要
Both start-up and sustainment of plasma were successfully achieved by fully non- inductive current drive using microwave with a frequency of 8.2 GHz. Plasmas current of 15 kA was implemented for 1 s. Magnetic surface reconstruction exhibited a plasma shape with an aspect ratio of below 1.5. The plasma current was dependent significantly on the launched microwave power and vertical magnetic field, while not affected by the mode of launched wave and the toroidal refractive index. Hard X-ray （HXR） emitted from energetic electrons accelerated by the microwave was observed, and the discharge with a plasma current over 4 kA followed the same trend as the number of photons of 10 keV to 12 keV. This suggests that the plasma current may be driven by energetic electrons. Based on the experimental conditions, alternative explanations of how the plasma current could be driven are discussed.
Both start-up and sustainment of plasma were successfully achieved by fully non- inductive current drive using microwave with a frequency of 8.2 GHz. Plasmas current of 15 kA was implemented for 1 s. Magnetic surface reconstruction exhibited a plasma shape with an aspect ratio of below 1.5. The plasma current was dependent significantly on the launched microwave power and vertical magnetic field, while not affected by the mode of launched wave and the toroidal refractive index. Hard X-ray （HXR） emitted from energetic electrons accelerated by the microwave was observed, and the discharge with a plasma current over 4 kA followed the same trend as the number of photons of 10 keV to 12 keV. This suggests that the plasma current may be driven by energetic electrons. Based on the experimental conditions, alternative explanations of how the plasma current could be driven are discussed.
