期刊文献+

A new paleoenvironmental index for anoxic events—Mo isotopes in black shales from Upper Yangtze marine sediments 被引量:9

A new paleoenvironmental index for anoxic events—Mo isotopes in black shales from Upper Yangtze marine sediments
原文传递
导出
摘要 This paper investigates the high-solution of Mo isotopes and uses trace-element analyses for fresh and representative black shales and siliceous shales collected from the transition between the Late Ordovician and the Early Silurian at the Wangjiawan section in Yichang and the Late Permian Dalong Formation in the Shangsi Section of Sichuan. The applicability of different geochemical parameters used as paleo-oxygenation indices are also compared. The preliminary results show that V/(V+Ni), U auth (auth U), V/Cr, Ce anom and U/Th have a scattered variation range, but most samples plot within the suboxic-anoxic fields. The suboxic-anoxic environment was dominant during the deposition and formation of the two anoxic facies. These redox indicators show little correspondence to the δ 98 Mo values. The U/Mo ratio can be used as a potential proxy for the paleo-redox conditions due to the possibility that Mo is enriched relative to U at different redox gradients during early diagenesis. This evidence is more significant for the euxinicity condition and corresponds to positive δ 98 Mo (>1.5‰) values with low U/Mo ratios. This evidence is likely related to the depositional conditions near the boundary between anoxic and euxinic environments, which are characterised by low bioturbation or water circulation. Other samples reveal a wide scatter of U/Mo ratios and δ 98 Mo <1.5‰. These results are likely due to punctuated improvements in oxygenation with intense bioturbation or water circulation, which led to the redistribution of trace element. This paper investigates the high-solution of Mo isotopes and uses trace-element analyses for fresh and representative black shales and siliceous shales collected from the transition between the Late Ordovician and the Early Silurian at the Wangjiawan section in Yichang and the Late Permian Dalong Formation in the Shangsi Section of Sichuan. The applicability of different geochemical parameters used as paleo-oxygenation indices are also compared. The preliminary results show that V/(V+Ni), Uauth (auth U), V/Cr, Ceanom and U/Th have a scattered variation range, but most samples plot within the suboxic-anoxic fields. The suboxic-anoxic environment was dominant during the deposition and formation of the two anoxic facies. These redox indicators show little correspondence to the δ98M0 values. The U/Mo ratio can be used as a potential proxy for the paleo-redox conditions due to the possibility that Mo is enriched relative to U at different redox gradients during early diagenesis. This evidence is more significant for the euxinicity condition and corresponds to positive δ98M0 (〉1.5%o) values with low U/Mo ratios. This evidence is likely related to the depositional conditions near the boundary between anoxic and euxinic environ- ments, which are characterised by low bioturbation or water circulation. Other samples reveal a wide scatter of U/Mo ratios and δ98M0 〈1.5%0. These results are likely due to punctuated improvements in oxygenation with intense bioturbation or water circulation, which led to the redistribution of trace element.
出处 《Science China Earth Sciences》 SCIE EI CAS 2011年第7期1024-1033,共10页 中国科学(地球科学英文版)
基金 supported by National Natural Science Foundation of China (Grant Nos. 40673020, 40839903, 40821061) Ministry of Education of China (Grant Nos. IRT0441 and B07039) China Petroleum & Chemical Corporation Project (Grant No. G0800-06-ZS-319) MOST Special Fund from the State Key Laboratory of Geological Processes Mineral Resources and the Fundamental Research Funds for the Central Universities
关键词 缺氧事件 海洋沉积物 环境指数 黑色页岩 同位素 长江上游 氧化还原条件 地球化学参数 molybdenum isotopes, proxy for paleo-redox conditions, black shale, Upper Yangtze
  • 相关文献

参考文献13

二级参考文献94

共引文献304

同被引文献174

引证文献9

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部