期刊文献+

DT聚变脉冲中子产额的活化测量法 被引量:1

Activation method for measuring pulse neutron yield of DT fusion reaction
下载PDF
导出
摘要 设计了一个测量高强度DT聚变脉冲中子产额的活化探测器。该探测器由中子慢化体、天然银片、塑料闪烁体和光电倍增管组成,其输出电流通过一个小电流计来获取。通过分析探测器在直流标定和脉冲测量两种状态下输出电流的变化曲线,求解出了特征参数,进而推导计算出DT聚变脉冲中子源的产额。实践证明,这种测量方法与传统的活化法相比,减少了对活化片截面数据准确性的依赖,具有简单、方便、近似在线测量等优点。 In order to measure the neutron yield of DT pulse neutron source,a silver-activated detector was designed.The detector consists of neutron moderator(slowing-down materials),natural silver foils,plastic scintillators and a photomultiplier tube(PMT).The output current of the detector was recorded by a micro-current-meter.By comparing and analyzing the differences between the output current curves of the detector which were measured under the constant radiation source and that of the pulse neutron source,characterized parameters were deduced.So the yield of DT pulse neutron source could be calculated.It is proved that this new method reduces the dependence of the cross section data,and it is very simple and convenient for on-line measurement.
出处 《核聚变与等离子体物理》 CAS CSCD 北大核心 2011年第2期172-175,共4页 Nuclear Fusion and Plasma Physics
关键词 银激活探测器 脉冲中子源 中子产额 塑料闪烁体 Silver-activation detector Pulse neutron source Neutron yield Plastic scintillator
  • 相关文献

参考文献10

二级参考文献22

  • 1吕铭方,韩,王新新.用银激活计数器测量快脉冲中子[J].核电子学与探测技术,1994,14(4):212-217. 被引量:10
  • 2陈家斌,冯杰郑,志坚,唐道源,刘忠礼,苏春晓,陈晓峰,陈玉婷.塑料闪烁探测器氘氚中子灵敏度标定[J].强激光与粒子束,1995,7(1):141-145. 被引量:8
  • 3高启锦.焦点中子诊断及银计数器的实验研究[M].北京:清华大学出版社,1981..
  • 4Lorche R A.Neutron yield by copper activation[R].UCRL-50021-76.
  • 5UCRL-50021-86.
  • 6Balian R,Adan J C.Interactiser-Plason Lama[M].New York.North-Holland Publishing Compamy,1982.
  • 7V.YU.GLEBOV,D.D.MEYERHOFER,and C.STOECKL.Measurement of Secondary Neutron Yield by Copper.Activation.Laboratory for Laser Energetics,U.of Rochester.
  • 8王新新,中国科学.E,1999年,29卷,1期,76页
  • 9Lee Sing,IEEE Transactions Plasma Science,1998年,26卷,1119页
  • 10高启锦,学位论文,1981年

共引文献25

同被引文献4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部