摘要
Some research efforts to improve the efficiency and noise performance of buck DC-DC converters are explored.A carefully designed power MOSFET driver,including a dead time controller,discontinuous current mode（DCM） controller and gate width controller,is proposed to improve efficiency.Instead of PWM modulation, sigma-delta modulation is introduced into the feedback loop of the converter to move out the clock-referred harmonic spike.The proposed converter has been designed and fabricated by a 0.35μm CMOS process.Measured results show that the peak efficiency of the converter can reach 93%and sigma-delta modulation suppresses the harmonic spike by 30 dB over PWM modulation.
Some research efforts to improve the efficiency and noise performance of buck DC-DC converters are explored.A carefully designed power MOSFET driver,including a dead time controller,discontinuous current mode（DCM） controller and gate width controller,is proposed to improve efficiency.Instead of PWM modulation, sigma-delta modulation is introduced into the feedback loop of the converter to move out the clock-referred harmonic spike.The proposed converter has been designed and fabricated by a 0.35μm CMOS process.Measured results show that the peak efficiency of the converter can reach 93%and sigma-delta modulation suppresses the harmonic spike by 30 dB over PWM modulation.
基金
Project supported by the National High Technology Research and Development Program of China(No.2009AA011607)
