摘要
根据实际生产数据探讨了酮苯装置处理量与产品收率、能耗的关系。为优化操作,可作如下控制:生产三线-5℃油,当原料处理量为10 t/h、一次稀释量为12 t/h,一段滤机进料温度控制在-13℃^-12℃时,产品收率为65.93%,平均耗电量为5887 kWh;生产三线石蜡,当原料处理量为5 t/h、一次稀释量为15 t/h,一段滤机进料温度控制在3℃~4℃时,产品收率为74.53%,平均耗电量为4924 kWh。
The paper discussed the amount effect onyield percentage and energy consumption of ketone-benzoldewaxing and deoiling unit. To optimize the operation, when the lubricant oil frozen at -5℃ is processed, the parameters should be set as follows: processing amount at 10t/h, diluting amount at 12t/h, feeding temperature controlled between -13℃~-12℃, yield percentage is 65.93% with an energy consumption of 5887 kWh in average; when the 3rd decompression line wax is processed, the parameters should be set as follows: processing amount at 5t/h, diluting amount at 15t/h, feeding temperature controlled between 3℃~4℃, the yield percentage obtained is 74.53% with an energy consumption of 4924 kWh in average.
出处
《石油与天然气化工》
CAS
CSCD
2011年第3期240-242,217-218,共3页
Chemical engineering of oil & gas
关键词
酮苯脱蜡油装置
处理量
收率
能耗
ketone-benzol dewaxing and deoiling unit
processing amount
yield percentage
energy consumption