期刊文献+

超临界机组给水加氧处理技术 被引量:6

Oxygenated feed-water treatment technology at the supercritical units
下载PDF
导出
摘要 大唐三门峡发电有限责任公司的3#机组给水早期采用还原性全挥发处理方式,存在流动加速腐蚀,机组投运不到2年,水冷壁垢量就接近化学清洗标准,现在改用给水加氧处理技术.介绍给水加氧处理技术,分析应用效果.与还原性全挥发处理方式比较,加氧处理技术具有锅炉受热面结垢速率低、化学清洗周期短、精处理混床运行周期长、自用水率低以及化学加药量小等优点,提高了机组运行的经济性和安全性. The feed-water all volatile treatment(AVT) was applied in the generator unit 3 of Datang Sanmenxia Power Plant Co.Ltd.The generator operated less than two years,the scale quantity of water-wall tubes was close to the limiting values of China Chemical Cleaning Standard due to flow-accelerated corrosion(FAC).In order to improve it,the feed-water oxygenated treatment(OT) is currently used.The OT technology is introduced and its application results are analyzed in this paper.OT has several advantages over AVT,e.g,low deposition rate of boiler heating surface,long period of the chemical cleaning,long operation period of mixed bed,low auxiliary water ratio and chemical dosing quantity,etc.The economy and security for the unit operation is obviously improved.
出处 《电力科学与技术学报》 CAS 2011年第2期123-127,共5页 Journal of Electric Power Science And Technology
关键词 超临界机组 加氧处理 腐蚀 汽水品质 supercritical units feedwater oxygenated treatment corrosion steam-water quality
  • 相关文献

参考文献9

  • 1李志刚,李贵成,沈保中,龚秋霖.华能石洞口电厂600MW超临界机组给水加氧、加氨联合处理应用研究[J].热力发电,1998,27(6):42-50. 被引量:12
  • 2DL/T805.4-2004,火电厂汽水化学导则第4部分:锅炉给水处理[S].
  • 3Dooley R B, Larkin B, Webb L, et al. Oxygenated treatment for fossil plants [C]. International Water Conference 53,Pittsburgh, PA,1992.
  • 4Quadri G, Scolari P V, Scalari G P, et al. Combined water treatment (CWT) in oncethrough boilers: ENEL experience [C]. International Water Conference 51, Pittsburgh, PA, 1990.
  • 5DL/T805.1-2002.火电厂汽水化学导则第1部分:直流锅炉给水加氧处理导则[S].
  • 6DL/T794-2001.火电厂锅炉化学清洗导则[S].
  • 7GB50030-91氧气站设计规范[S].
  • 8DL/T912-2005,超临界火力发电机组水汽质量标准[S].
  • 9曹杰玉,王二福,刘玮,宋敬霞,石秋生.DL/T677-2009发电厂在线化学仪表检验规程[s],中华人民共和国国家能源局,2009.

共引文献36

同被引文献101

引证文献6

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部