期刊文献+

非对称性对线型聚能射流的影响 被引量:4

Effect of Asymmetry on Linear Shaped Charge
原文传递
导出
摘要 为了研究非对称性因素对线型聚能射流的影响,运用流体动力学原理,从理论上分别分析和推导了斜入射冲击波和药型罩不对称2个主要因素对射流的影响程度.数值模拟和理论计算均表明:不对称程度较小时,射流不会明显偏离轴线,但射流的两翼将出现不对称,射流的缩颈和断裂时间也会提前;当不对称程度增大时,射流明显偏离轴线,射流的两翼明显不对称,射流的缩颈和断裂时间将大大提前. In order to study the effect of asymmetric factors on linear shaped charge,the fluid dynamics was used,and two major factors such as oblique incident wave and asymmetric liner,were considered by theoretical analysis respectively.Numerical simulation and theoretical calculation show that:when asymmetry is small,the jet dosen ' t significantly deviate from the axis,but the asymmetry of jet ' s wings appears,and the necking time and the fracture time of the jet will be advanced.When asymmetry increases,the jet deviates significantly from the axis,and the jet ' s wings is also significantly asymmetric,and jet ' s necking time and fracture time will be greatly advanced.
出处 《弹道学报》 EI CSCD 北大核心 2011年第2期96-100,共5页 Journal of Ballistics
关键词 聚能射流 非对称性 影响因素 数值模拟 shaped charge asymmetry effect factor numerical simulation
  • 相关文献

参考文献7

二级参考文献10

  • 1[2]Manfred Held. TRUNCATED SHAPED CHARGES [D]. 15th Intern. Symp. on Ballistics Jerusalem, Israel, 21-24 May, 1995, 21~30
  • 2[5]Klaus Weimann. Research and development in the Area of Explosively Formed Projectiles Charge Technology Propellants [J]. Explosives, Pyrotechnics, 1993, 18,294~298
  • 3栾军.实验设计的技术与方法[M].上海交通大学出版社,1986..
  • 4LS-DYNA970 keyword user's manual[M].Livermore Soft-ware Technology Corporation.,2003.
  • 5威廉 普 沃尔特斯 乔纳斯 埃 朱卡斯.成型装药原理及其应用[M].兵器工业出版社,1992,2..
  • 6李裕春.线型聚能射流的数值模拟及装药结构参数优化研究[D].南京:解放军理工大学工程兵工程学院,2001
  • 7崔云航.爆炸切割影响因素研究和优化设计[D].南京:解放军理工大学工程兵工程学院,2005
  • 8肖志武.STY液体炸药线性聚能切割的研究[D].南京:工程兵工程学院,1988.
  • 9廖政权.正交设计法在自锻装药研究中的应用[J].火炸药学报,1997,20(2):23-26. 被引量:1
  • 10唐献述,龙源,王耀华,纪永适,谭灵,张伟新.大型钢结构厂房拆除控制爆破总体方案设计[J].工程爆破,2002,8(4):24-28. 被引量:12

共引文献17

同被引文献30

  • 1姜剑生,杭义洪,冯其京.非对称射流形成研究[J].兵工学报,2004,25(3):292-295. 被引量:5
  • 2姚小虎,韩强,刘晓明,黄小清,赵隆茂.微爆索切割航空有机玻璃的研究[J].航空学报,2006,27(1):152-156. 被引量:7
  • 3谭林.线性聚能切割技术在抢险救援中的应用与研究[J].消防技术与产品信息,2006,19(7):32-34. 被引量:1
  • 4吴成,曾艳春,张向荣,张渝霞,史京住.环型聚能药型罩的设计新方法与实验[J].北京理工大学学报,2007,27(4):291-294. 被引量:25
  • 5Brown J, Softly I D,Edwards P. Experimental study of shaped charges with built-in asymmetries [ J ]. Propellant, Explo- sives, Pyrotechnics, 1993,18 (5) :255 - 258.
  • 6Brown J,Edwards J B. Studies of shaped charges with built- inasymmetries, part II: modeling [ J ]. Propellant, Explo- sives, Pyrotechnics, 1996,21 (2) :59 - 63.
  • 7Kelly R J, Curtis J P,Bremer M. On analytic of casing and liner thickness variations in a shaped charge [ J ]. J. Appl. Phys, 1994,75(1) :96 - 103.
  • 8Curtis J P. Asymmetric formation of shaped charge jets [ (2]//17th International Symposium on Ballistics, 1998: 405 -412.
  • 9Ayisit O. The influence of asymmetries in shaped charge performance[ J]. International Journal of Impact engineer- ing, 2008,35 ( 12 ) : 1399 - 1404.
  • 10奥尔连科ЛП.爆炸物理学[M].孙承纬,译.北京:科技出版社,2011:954-959.

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部