摘要
以天然砂混凝土为基准,对比研究了机制砂以及机制砂中石粉含量、砂率变化对混凝土抗压强度与耐磨性的影响。研究结果表明:随着水灰比降低,无论是机制砂还是天然砂混凝土的抗压强度均逐渐增大,磨耗值逐渐降低。在同等条件下(相同水灰比、相同浆体含量),机制砂混凝土的强度与耐磨性均优于天然砂混凝土。当石粉含量在10%以内时,随石粉含量增加,机制砂混凝土磨耗值显著降低,但当石粉含量高于10%时,机制砂混凝土的磨耗值又略有提高。且随着机制砂混凝土砂率的提高,机制砂混凝土耐磨性下降。
Compared with the national sand concrete,it is investigated that the effects of manufactured sand,the different content micro-fines and sand ratio of the manufactured sand on the compressive strength and abrasion resistance.The results show that with the decrease of W/C,the compressive strength and abrasion resistance of whether the manufactured sand concrete or natural sand concrete is improved.Under the same conditions(same water-cement ratio,the same paste content),the compressive strength and abrasion resistance of the manufactured sand concrete are better than that of the natural sand concrete.When the micro-fines is lower than 10%,the abrasion value of the manufactured sand concrete decreases obviously with the increase of the micro-fines content.However,the abrasion value of the manufactured sand concrete increases slightly.And with the increase of the manufactured sand concrete's sand ratio,the abrasion resistance of the manufactured sand decreases gradually.
出处
《公路》
北大核心
2011年第7期207-211,共5页
Highway
基金
中央级公益性科研院所基本科研业务费专项资金项目
关键词
水泥混凝土路面
机制砂
石粉
磨耗值
界面过渡区
manufactured sand
micro-fines
abrasion resistance
interfacial transition zone