期刊文献+

钢筋混凝土水池施工缝的处理方法

TREATMENT METHOD OF CONSTRUCTION JOINT IN REINFORCED CONCRETE POOL
下载PDF
导出
摘要 钢筋混凝土水池在施工中需要多次浇注完成,必须设置水平施工缝,施工缝如果处理的不好,容易发生渗漏,影响水池的使用功能。须确定合理的施工缝位置,采用较好的接缝形式,合理地进行接缝模板的安装,按规范要求施工可避免工程质量问题。 Reinforced concrete pool requires multiple pouring in construction, horizontal construction joint must be set, if the treatment method of construction joints is not good, leakage occurs easily, it will affect the use function of water tank. Determination reasonable position of construction joint, using good construction joint form, carrying out rational formwork installation in construction joint, constructing according to standard, the engineering quality problems can be avoided.
作者 郭密 赵冰
出处 《建筑技术开发》 2011年第7期46-47,共2页 Building Technology Development
关键词 钢筋混凝土水池 施工缝 钢板止水带 reinforced concrete pool construction joint steel water stop tie
  • 相关文献

参考文献4

  • 1GB50010-2002.混凝士结构设计规范[S].北京:中国建筑工业出版社,2002.
  • 2GB50069-2002.给水排水工程构筑物结构设计规范[s].北京:中国建筑工业出版社,2002.
  • 3CECSl38:2002.给水排水工程钢筋混凝土水池结构设计规程[S].北京:中国建筑工业出版社,2002.
  • 4李学春.水池工程施工缝的施工[J].山西建筑,2007,33(28):159-160. 被引量:9

二级参考文献2

共引文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部