摘要
由于用于水泥混凝土路面下的ATPB的特殊性,本文围绕其最佳沥青用量的确定方法以及试件成型方法2个方面展开研究.提出了沥青膜-析漏试验方法以及震动台法来分别确定ATPB基层沥青混合料的最佳沥青用量和成型试件.并根据这2种方法成型试件检验ATPB的性能,得到几条结论:强度、抗压回弹模量、排水性能、水稳定性能均满足要求;强度、抗压回弹模量、排水性能、水稳定性能与孔隙率、级配组成都有一定的关系.
To reduce water damage of cement pavement,employing ATPB under cement pavement is investigated in the paper.The paper focuses on the way to determine the optimum asphalt content and to form test specimens,and proposes asphaltmembrane-leakage experiment method and vibrostand method.The performance of ATPB is inspected by using test specimens formed by the above methods and two conclusions are drawn:(1) strength,compressive resilience modulus,moisture susceptibility,and drainage capacity all meet requirements,(2) strength,compressive resilience modulus,moisture susceptibility,and drainage capacity are all related to porosity and graduation composition.
出处
《烟台大学学报(自然科学与工程版)》
CAS
北大核心
2011年第3期236-240,共5页
Journal of Yantai University(Natural Science and Engineering Edition)
基金
长安大学课题资助项目(TM08H103)
关键词
沥青稳定碎石排水基层
强度
水稳定性
排水性能
asphalt treated permeable base
strength
moisture susceptibility
performance of drainage