摘要
为实现高品质低氧钢的生产,有效降低钢中全氧含量,在考虑转炉下渣、炉渣氧化性以及钢水氧活度影响的前提下,通过研究钢包渣改质技术、过程钢包渣氧化性控制技术以及相应的钢包底吹氩制度等精炼工艺,建立了转炉-连铸流程生产低氧钢的精炼工艺技术。采用该技术生产的高品质优特钢成品w([TO])≤15×10-6。
In order to produce low oxygen steel with high quality, converter slag-tapping, slag oxidability and oxygen activity were analyzed. In addition, modifying and adding process of slag, control of slag oxidability and bottom argon-blowing in ladle were researched as well. On this basis, refining process which is good for low oxygen steel producing with converter-continuous casting process has been developed. The results show that ω([TO]) in steel is not more than 15 × 10-6.
出处
《钢铁》
CAS
CSCD
北大核心
2011年第7期41-44,共4页
Iron and Steel
关键词
低氧钢
夹杂物
全氧含量
精炼工艺
low oxygen steel
inclusion
ω([TO])
refining process