摘要
基于数值模拟的方法研究在循环塑性变形下铝合金板的力学行为。首先,通过Cockcroft-Latham韧性断裂准则得到材料的断裂极限应力图,并通过实验对成形极限应力图进行验证。数值模拟结果表明:滚边时弯曲中心的应变路径可以认为是平面应变状态;采用绳式滚边方法可以改善在弯曲中心线上的应力集中现象。从滚边断口的扫描电镜照片可以发现,循环塑性变形对铝合金板的韧性断裂行为有影响。
A numerical analysis of mechanical behavior of aluminum alloy sheet under cyclic plastic deformation was investigated.Forming limit at fracture was derived from Cockcroft-Latham ductile damage criterion.The strain path of bending center of incremental roller hemming could be accepted as a kind of plane strain bending deformation process.Incremental rope roller hemming could be used to alleviate ductile fracture behavior by changing the stress state of the hemming-effected area.SEM observation on the fracture surface indicates that cyclic plastic deformation affects ductile fracture mechanism.
基金
Project(2010CB731703) supported by the National Basic Research Program of China
Project(0804) supported by the Shanghai Automotive Industry Corporation Foundation,China
Project(MSV-2010-03) supported by State Key Laboratory of Mechanical System and Vibration,Shanghai Jiao Tong University,China
关键词
铝合金
韧性断裂
增量成形
循环塑性变形
aluminum alloy
ductile damage
incremental forming
cyclic plastic deformation
