摘要
The adsorption capacities of new humic acids isolated from Yakouren forest （YHA） and Sahara （Tamenrasset： THA） soils （Algeria） and commercial humic acid （PFHA） on polyaniline emeraldine base （PEB） were studied at pH 6.6. Also the adsorption of heavy metals such as Cd 2＋ , Zn 2＋ and Ni 2＋ on humic acid-polyaniline systems （HA-PEB） was investigated at the same conditions. HA-PEB compounds were characterized by scanning electron microscopy （SEM）, infrared spectrometry and cavity microelectrode. In addition, batch adsorption and cavity microelectrode were used in the adsorption study of Cd 2＋ , Zn 2＋ and Ni 2＋ on HA-PEB. To develop biocaptors of polluting metals using a cavity microelectrode modified by HA-PEB systems, the adsorption kinetic and adsorption capacity were investigated. The SEM analysis showed that the presence of humic acid affected the PEB surface and caused the formation of a granular morphology. The maximum adsorption capacities （q max ） of PFHA, THA and YHA determined by adsorption isotherms were 91.31, 132.1 and 151.0 mg/g, respectively. Batch adsorption results showed that q max of Cd 2＋ , Zn 2＋ and Ni 2＋ on HA-PEB followed the order： THA-PEB YHA-PEB PFHA-PEB. The voltammograms obtained with HA-PEB modified cavity microelectrode showed the appearance of new redox couples reflecting the adsorption of HA on PEB. Metal-humic acid-polyaniline voltammograms were characterized by appearance of oxidation-reduction couples or reduction wave corresponding to metal. Finally, the result may be exploited to develop a biocaptor based on the cavity microelectrode amended by THA-PEB and YHA-PEB.
The adsorption capacities of new humic acids isolated from Yakouren forest （YHA） and Sahara （Tamenrasset： THA） soils （Algeria） and commercial humic acid （PFHA） on polyaniline emeraldine base （PEB） were studied at pH 6.6. Also the adsorption of heavy metals such as Cd 2＋ , Zn 2＋ and Ni 2＋ on humic acid-polyaniline systems （HA-PEB） was investigated at the same conditions. HA-PEB compounds were characterized by scanning electron microscopy （SEM）, infrared spectrometry and cavity microelectrode. In addition, batch adsorption and cavity microelectrode were used in the adsorption study of Cd 2＋ , Zn 2＋ and Ni 2＋ on HA-PEB. To develop biocaptors of polluting metals using a cavity microelectrode modified by HA-PEB systems, the adsorption kinetic and adsorption capacity were investigated. The SEM analysis showed that the presence of humic acid affected the PEB surface and caused the formation of a granular morphology. The maximum adsorption capacities （q max ） of PFHA, THA and YHA determined by adsorption isotherms were 91.31, 132.1 and 151.0 mg/g, respectively. Batch adsorption results showed that q max of Cd 2＋ , Zn 2＋ and Ni 2＋ on HA-PEB followed the order： THA-PEB YHA-PEB PFHA-PEB. The voltammograms obtained with HA-PEB modified cavity microelectrode showed the appearance of new redox couples reflecting the adsorption of HA on PEB. Metal-humic acid-polyaniline voltammograms were characterized by appearance of oxidation-reduction couples or reduction wave corresponding to metal. Finally, the result may be exploited to develop a biocaptor based on the cavity microelectrode amended by THA-PEB and YHA-PEB.
