摘要
目前,国际热核聚变实验反应堆ITER装置仅有针对MCNP程序的三维中子学基准模型(ITERA-lite4),因此无法使用TRIPOLI程序对ITER装置进行中子学计算分析。本文利用蒙特卡罗计算自动建模软件MCAM 5.1创建ITER装置的三维中子学TRIPOLI模型,并通过TRIPOLI程序对其进行中子学计算分析。计算结果与基于ITER A-lite4的MCNP计算结果吻合良好,从而验证了所建模型的正确性。
At present, the ITER 3D neutronics reference model (named ITER A-lite4) is only for MCNP code. In order to use TRIPOLI code to do neutronics analysis of ITER, the 3D TRIPOLI model needs to be created. This paper presents the application of monte carlo automatic modeling program for particle transport simulation (MCAM) version 5.1 to build the ITER 3D neutronics TRIPOLI model. The calculation results of the model performed by TRIPOLI code were consistent with the calculation results of ITER A-lite4 by MCNP code, which demonstrated the correctness of the ITER TRIPOLI model.
出处
《核科学与工程》
CSCD
北大核心
2011年第2期162-168,共7页
Nuclear Science and Engineering
基金
中法国际合作项目(CAEA-CNNC/CEA-DEN,ASIPP_DM2S_IRFM_2008_01)
ITER次临界堆自动建模与核数据库研究(项目号2010GB111004)
中科院信息化专项项目(INFO-115-C01-SDB2-01)
中科院知识创新工程重要方向项目(kJCX2-YW-N37与KJCX2-YW-N35)的资助。