摘要
为了提高无线传输过程中通信信息被窃听的难度,提出了一种采用多波束发射人工噪声干扰来实现物理层安全传输的方法。发送端同时发送通信信息和两组人工噪声,通过天线加权系数调整使通信信息的方向图主瓣对准期望方位,而人工噪声的方向图在期望方位形成零陷。仿真结果表明,该方法可实现在空间某一期望方位的可靠通信,而偏离该方位的接收机误码性能迅速下降,在方向图旁瓣范围内根本无法解调出有用信息。
A secure method based on multi-beam and artificial noise is proposed eavesdropped during the physical layer transmitting. Transmitter sends the signal to guarantee the information unbearing information and two artificial noise signals simultaneously. Each signal is multiplied by a group of weighting coefficients, which is generated through adapative beamforming technique, to enable that the main lobe of antenna pattern of the signal bearing information directs expected position while the antenna patterns of artificial noises form nulls at the same position. Simulation results show that the desired receiver can demodulate the information effectively while the performance deteriorates obviously when the azimuth deviates off the desired receiver.
出处
《电讯技术》
北大核心
2011年第7期30-33,共4页
Telecommunication Engineering
关键词
安全通信
物理层
多波束
人工噪声
secure communication
physical layer
multi-beam
artificial noise
