摘要
介绍了国内外变压器油腐蚀性硫的几种检测方法,对这些试验方法的适用范围、试验条件等进行了对比,考察目前最适合检测变压器油腐蚀性硫的方法。选用性质不同的变压器油基础油和成品油,分别采用铜片法(SH/T0304—1999、ASTM D1275—2006 B)、银片法(SH/T0804—2007)和裹绝缘纸铜线法(IEC62535—2008)在实验室进行腐蚀性硫的检测和对比。结果表明,IEC62535—2008方法是目前检测变压器油是否存在腐蚀性硫倾向的最佳方法。
Several test methods home and abroad for detecting corrosive sulfur in electric insulating oils were introduced and compared from the aspects of applied scope and test conditions,in order to se lect an optimum test method for detecting corrosive sulfur in transformer oils. Meanwhile, the corrosive sulfur in various transformer base oils and products were tested by copper sheet method（SH/T0304-- 1999 andASTMD1275--2006B）,silver stri Ptest（SH/T0804 2007）and copper wire wrapped with insulation paper test（IEC62535 2008）. Test results showed that IEC62535--2008 was the most suitable method to detect the tendency of existing corrosive sulfur in transformer oils.
出处
《石油炼制与化工》
CAS
CSCD
北大核心
2011年第8期88-92,共5页
Petroleum Processing and Petrochemicals
关键词
腐蚀性硫
电气绝缘油
变压器油
corrosive sulfur
electric insulating oil
transformer oil
