期刊文献+

瞄准类光学仪器保护玻璃误差分析

Analysis of Protective Glass Error for Pointing Optics Device
下载PDF
导出
摘要 保护玻璃的平行差对一般观察光学仪器成像影响不大,但瞄准类光学仪器保护玻璃楔形平行性误差会引起系统色差及光轴的变动,最小焦距误差会改变系统总焦距。通过对平行平板光学玻璃楔形平行差、最小焦距及色差的分析计算提出了影响后面光学系统成像质量的因素。并通过对美国90型搜索潜望镜保护玻璃水平及垂直光学截面内平行差的矩阵计算,为光学平晶的设计提供了依据,也为制造过程指标控制给出了测量方法。 The wedge angle deviation of protective glass has little effect on the imaging of general observing optical instrument. The system color aberration and optical axis were changed by the wedge angle deviation of protective glass. The total focus of the system was changed by the least focus. The affecting factors of imaging quality were presented by the analyse of the parallel error, the least focus of plant and the color aberration. The matrix of the parallel error in plane and upright section of the American 90 searching periscope was calculated.
出处 《光学与光电技术》 2011年第4期92-94,共3页 Optics & Optoelectronic Technology
关键词 平行差 平板最小焦距 色差 矩阵 parallel error least focus of plant color aberration matrix
  • 相关文献

参考文献7

  • 1《光学仪器设计手册》编辑部.光学仪器设计手册[M].北京:国防工业出版社,1972.
  • 2徐家骅.工程光学基础[M].北京:高等教育出版社,1993.
  • 3张坤石.潜艇光电装备技术[M].北京:国防工业出版社,1983:127-129.
  • 4连铜淑.棱镜调整[M].北京:国防工业出版社,1979:14-20.
  • 5гв波加列夫.光学调整问题[M].北京:国防工业出版社,1977.
  • 6徐晨,陈磊.光学平面绝对检验方法的研究[J].光学技术,2006,32(5):775-778. 被引量:15
  • 7柴光远,周炯,田满洲.平面度误差检测方法的研究[J].机床与液压,2007,35(5):184-185. 被引量:6

二级参考文献15

  • 1费业泰.误差理论与数据处理[M].机械工业出版社,2001..
  • 2Rayleigh L.Interference bands and their applications[J].Nature,1893,48:212-214.
  • 3Schulz G,Schwider J.Interferometric testing of smooth surfaces,Progress in Optics XⅢ[M].E.wolf,ed.Ch4 North-Holland,Amsterdam,1976.96-127.
  • 4Schulz G,Schwider J.Precise measurement of planness[J].Applied optics,1967,6(6):1077-1084.
  • 5Schulz G,Schwider J.Establishing an optical flatness[J].Applied optics,1971,10(4):929-934.
  • 6Fritz B S.Absolute calibration of an optical flat[J].Optical Engineering,1984,23(4):379-383.
  • 7Keenan P B.Pseudo-ShearInterferometry[J].SPIE,1984,123(4):2-9.
  • 8Grzanna J,Schulz G.Absolute testingof flatness standards at square-grid points[J].Optics communication,1990,77 (2,3):107-112.
  • 9Schulz G,Grzanna J.Absolute flatness testing by the rotation method with optimal measuring-error compensation[J].Applied Optics,1992,31(19):3767-3780.
  • 10Schulz G.Absolute flatness testing by an extended rotation method using two angle of roation[J].Applied Optics,1993,32(7):1055-1059.

共引文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部