摘要
研究了复合材料整体加筋板七点弯曲试验的失效表征问题。在有限元分析的基础上,设计了七点弯曲试件和试验夹具。在试验研究和有限元计算的基础上,对七点弯曲试验的失效机理进行了讨论分析。通过对一系列七点弯曲试验模型的分析,获得了复合材料加筋板典型部位的失效包线,并给出了失效表征方法。最后给出了指导复合材料整体加筋板结构细节设计的建议。
The failure characterization is studied for the sevenpoint bending tests of integrated composite panels.The specimen and fixture of seven-point bending test are designed based on the finite element analysis.Furthermore,the failure mechanisms of the specimen are discussed based on the test results and the finite element simulations.The failure envelop of the typical structural details is obtained and the method is presented for the failure characterization of the specimen by numerically simulating a series of seven-point bending test models.Finally,some suggestions are proposed for the detailed design of integrated stiffened composite panels.
出处
《南京航空航天大学学报》
EI
CAS
CSCD
北大核心
2011年第4期470-474,共5页
Journal of Nanjing University of Aeronautics & Astronautics
基金
国家自然科学基金(10872091)资助项目
江苏省普通高校研究生科研创新计划(CX09B-084Z)资助项目
南京航空航天大学博士生创新与创优基金(BCXJ09-02)资助项目
关键词
整体加筋板
七点弯曲试验
粘接元
失效表征
integrated composite panel
seven-point bending test
cohesive element
failure characterization