期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

A/B双摆角数控万能铣头摆角力矩的计算研究 被引量：3

Research on calculating drive torque of milling head with A/B rotating axis
下载PDF
导出
摘要 通过理论推导和计算给出了A/B双摆角数控万能铣头摆角力矩的计算公式,并初步验证了公式的正确性。摆角力矩计算公式的研究对摆角铣头的结构设计具有重要的指导意义。 Through theoretical derivation and calculation the author gives calculation formula of axis drive torque,and a preliminary verification of the correctness of the formula.Calculation formula research on drive torque is of important guiding significance to the structural design of milling head with A/B rotating axis.
作者 王卫朝 李初晔
机构地区 北京航空制造工程研究所
出处 《制造技术与机床》 CSCD 北大核心 2011年第4期40-44,共5页 Manufacturing Technology & Machine Tool
基金 "高档数控机床与基础制造装备"科技重大专项资助项目(2009ZX04011-015)
关键词 数控机床 A/B双摆角铣头 摆角力矩 NC Machine Tool Milling Head with A/B Rotating Axis Axis Drive Torque
分类号 TG547 [金属学及工艺—金属切削加工及机床]
  • 相关文献

参考文献3

二级参考文献10

  • 1邵长林.用于钛合金零件加工的机床与刀具——俄罗斯钛合金零件机械加工技术综述[J].航空制造技术,2001,44(S1):37-38. 被引量：3
  • 2邹浩波,张宇,戴丽玲.高速切削加工的刀具材料及其合理选择[J].机械工人（冷加工）,2005(4):15-17. 被引量：9
  • 3M.Nouari.Wear Characteristics and Performance of Multi-layer CVD-Coated Alloyed Carbide Tool in Dry end Milling of Titanium Alloy.Surface and Coatings Technology,2005 (8)
  • 4Z.G.Wang,etc.Tool Wear Characteristics of Binderless CBN Tools Used in High-Speed Milling of Titanium Alloys.Wear.2005(2)
  • 5H.A.Kishawy,etc.Tool Performance and Attainable Surface Quality During the Machining of Aerospace Alloys Using Self-Propelled Rotary Tools.Journal of Materials Processing Technology,2004 (10)
  • 6E.O.Ezugwu.Key Improvements in the Machining of Difficult-tocut Aerospace Superalloys.International Journal of Machine Tools and Manufacture,2005 (10)
  • 7N.Suresh Kumar Reddy,etc.Experimental Investigation to Study the Effect of Solid Iubricants on Cutting Forces and Surface Quality in end Milling.International Journal of Machine Tools and Manufacture,2006 (2)
  • 8Z.G.Wang.High-Speed Milling of Titanium Alloys Using Binderless CBN Tools.International Journal of Machine Tools and Manufacture,2005 (1)
  • 9E.O.Ezugwu,etc.Evaluation of the Performance of CBN Tools When Turning Ti-6Al-4V Alloys With High Pressure Coolant Supplies.International Journal of Machine Tools and Manufacture,2005 (7)
  • 10李德华,陈志勇.钛合金切削加工刀具材料选用与加工工艺方法[J].湖北航天科技,2000(5):32-37. 被引量：5

共引文献31

同被引文献24

  • 1Yang J X, Altintas Y. A generalized on-line estimation andcontrol of five-axis contouring errors of CNC machine tools[J]. International Journal o f Machine Tools &Manufacture,2015,88:9 -2 3 .
  • 2Xie F G , Liu X J , Wang L P , et al. Optimal design anddevelopment of a decoupled A/B-axis tool head with parallelkinematics[J]. Advances in Mechanical Engineering ,2010,2( 2 ) 1 - 1 4 .
  • 3姜超. 直驱式A / B 摆角万能铣头的设计与研制[D] . 北京:北京航空航天大学,2014.
  • 4Hu S W , Yang Q D, Peng B Y, et al. Direct-drive bi-rotarymilling head variable load thermal characteristics analysis[C]//C onference on Modelling, Identification and Control.Hong Kong,2012:270 -276.
  • 5Reedman A V C ,Bouazza-Marouf K. An actively constrainedtwo degree-of-freedom manipulator for passive deploymentapplications[J]. Proceedings o f the Institution o f MechanicalEngineers. Part S: Journal o f Systems and ControlEngineering,2004,218 ( 12) : 63 -7 4 .
  • 6Gawronski W. Control and pointing challenges of largeantennas and telescopes [J]. IEEE Transactions on ControlSystem 7echnology ,2001, 1 5 ( 2 ) : 276 - 289.
  • 7Robertz S G, Halt L , Kelkar S , et al. Precise robot motionsusing dual motor control [C]//IE E E InternationalConference on Robotics and Automation. Anchorage, 2010:5613 -5620.
  • 8Veres J , Cserey G, Szederkenyi G. Bio-inspired backlashreduction of a low-cost robotic joint using closed-loopcommutatedstepper motors [J]. Robotica, 2013, 31 ( 5 ) :786 -796.
  • 9薛汉杰.双电机驱动消隙技术及其在数控设备中的应用[J].航空制造技术,2009,52(17):84-88. 被引量：27
  • 10宋宇,陈无畏,陈黎卿.基于ADAMS与Matlab的车辆稳定性控制联合仿真研究[J].机械工程学报,2011,47(16):86-92. 被引量：40

引证文献3

二级引证文献5

制造技术与机床
2011年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部