期刊文献+

一种双向短行程永磁直线直流电机

A Bi-directional Short Stroke Permanent Magnet Linear DC Motor
下载PDF
导出
摘要 阐述了一种双向短行程永磁动圈式直线直流电动机的结构及特点,直线电机采用双环形磁钢、直线轴承滚动副支撑结构形式,径向磁场中的动圈固接在轴上并被两个刚度相同的预压弹簧平衡,导向机构阻止动圈周向转动,带有分辨率为1μm光栅尺,设计的行程范围为±5 mm。给出了样机的主要参数,并对样机进行了试验研究,结果表明直线电机输入电流与电磁力呈线性关系。在控制信号频率为30 Hz时,峰值电流为±2.56 A,峰值推力可达±30.9 N,最大速度可达±0.86 m/s,最大加速度可达±16.5 g。 The structure and features of a hi-directional short stroke linear DC motor with permanent magnets were presented. The magnetic field was produced by the two concentric ring permanent magnets embedded on the stator. The moving coil mounted on the shaft was a tubular coil situated within a radially oriented magnetic field and balanced by the two opposing forces generated by two springs along with the central axis and supported by the two linear bearings. The linear guide prevented the moving coil from rotating around on the central axis and carries with the linear optical encoder of 1 μm resolution. The required controlled travel was limited in a ± 5 mm displacement range. The prototype specifications were given. The experimental results show that between the electromagnetic force and the coil electric current exists a linear relation. When the frequency of control command is the 30Hz sine wave, the peak current, the peak force, the max velocity and the max acceleration are, respectively,±2.56A,±30. 9N, ±0. 86m/s and ±16. 5g.
出处 《微电机》 北大核心 2011年第8期14-16,共3页 Micromotors
基金 国家自然科学基金资助项目(60474021) 河南省自然科学基金资助项目(2008A460012)
关键词 直线直流电机 双向短行程 永磁 动圈式 linear DC motor hi-directional short stroke permanent magnet moving coil type
  • 相关文献

参考文献7

  • 1杨帆,杨海宽,陈志华,王贵林.音圈式快速伺服刀架的分析与设计[J].国防科技大学学报,2009,31(4):42-47. 被引量:7
  • 2江思敏,王先逵,吴丹,司勇.凸轮数控车削系统关键技术的研究[J].机械工程学报,2003,39(12):135-139. 被引量:11
  • 3Bang Y. B, Lee K. M. Linear Motor for Ejector Mechanism[J]. International Journal of Advanced Manufacturing Technology, 2004, 24 : 582 - 589.
  • 4Mizuno T, lwadare M, Nanahara M, et al. Considerations on Electrical and Mechanical time Constants of a Moving-magnet-type Linear DC motor [ J ]. Journal of Sensors and Actuators A: Physical, 2000, 81(3): 301-304.
  • 5Yajima H, Wakiwaka H, Senoh S. Consideration on High-response of a Linear DC Motor[J]. IEEE Trans. on magnetics, 1997, 33 (5): 380 -382.
  • 6王坤东,颜国正.一种微小型永磁直流直线电机[J].电机与控制学报,2006,10(1):70-73. 被引量:4
  • 7Du Zhiqiang, Zhou Zude, Ai Wu, et al. A Linear Drive System for the Dynamic Focus Module of SLS Machines [J]. International Journal of Advanced Manufacturing and Technology, 2007, 32: 1211 -1217.

二级参考文献11

  • 1张大卫,冯晓梅.音圈电机的技术原理[J].中北大学学报(自然科学版),2006,27(3):224-228. 被引量:66
  • 2李荣彬,杜雪,张志辉.自由曲面光学设计与先进制造技术[R].香港理工大学先进光学制造中心,2005.
  • 3Can S W, Rahnum M, Lim H S. A High Precision Piezoelectric Fine Toni Servo System for Diamond Turning[C]//The 1st International Conference on Nanomanufacturing (NanoMan2008), Singapore, 2008.
  • 4Fast Tool Servo Module for Precision Lathes[Z]. http: Ilwww. kineticceramics, com/pdf/fts400 _ 500 _ 600 _ brochure, pdf.
  • 5Machining a Biconic Mirror[Z]. http://www. pee. ncsu. edu/research/projects/biconic/.
  • 6Rogers K.Freeform Machining with Precitech Servo Tool Options[Z].http://www.precitech.com/Freeformmachiningwithprecitech.ServoTools052505.pdf.
  • 7Jiang S M, Wang X K, et al. The mechanismelectronical control system modeling of high frequency response and long travel linear servo unit for non-circular section turning.In: Proceedings of the Fifth International Conference on Progress of Machining Technology, Beijing University of Aeronautics and Astronautics, China. Beijing, 2000:530~535
  • 8吴丹,谢晓丹,王先逵.快速刀具伺服机构研究进展[J].中国机械工程,2008,19(11):1379-1385. 被引量:24
  • 9MA Jianxu,LIU Xiang,MA Jianhua,LI Mingdong,MA Peisun.Microbionic and peristaltic robots in a pipe[J].Chinese Science Bulletin,2000,45(11):985-988. 被引量:4
  • 10江思敏,王先逵,石忠东,吴丹,刘成颖.中凸变椭圆活塞加工用高性能直线伺服系统的研究[J].机械工程学报,2001,37(9):58-61. 被引量:20

共引文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部