期刊文献+

Preparation and mechanical properties of two nickel base alloy coatings achieved by electrospark deposition 被引量:1

Preparation and mechanical properties of two nickel base alloy coatings achieved by electrospark deposition
原文传递
导出
摘要 Ni398 and Ni818 base alloy coatings were deposited on 1045 steel by electrospark deposition technique (ESD). Forming properties, thickness, microhardness and wear resistance of the coatings were investigated. The chemical composition and cross- section morphology were analyzed through energy dispersive spectrum (EDS) and metalloscope. The results show that the technological parameter window of Ni398 is larger than that of Ni818 electrode. However, other properties of the Ni818 coating, such as thickness and microhardness, were better than those of the Ni398 coating. Especially the wornout volume of Ni818 coating is only 1/6 of that for 1045 steel and 1/3 for Ni398 coating. Chemical composition analysis indicated that the addition of Mo promoted grain refinement of nickel alloy. Metallographic analysis shows that the molten droplets of Ni398 coatings have an average structure thickness of 20-40 #m while the microstructure of Ni818 coatings is flat with width of 5-20 #m. Ni398 and Ni818 base alloy coatings were deposited on 1045 steel by electrospark deposition technique (ESD). Forming properties, thickness, microhardness and wear resistance of the coatings were investigated. The chemical composition and cross- section morphology were analyzed through energy dispersive spectrum (EDS) and metalloscope. The results show that the technological parameter window of Ni398 is larger than that of Ni818 electrode. However, other properties of the Ni818 coating, such as thickness and microhardness, were better than those of the Ni398 coating. Especially the wornout volume of Ni818 coating is only 1/6 of that for 1045 steel and 1/3 for Ni398 coating. Chemical composition analysis indicated that the addition of Mo promoted grain refinement of nickel alloy. Metallographic analysis shows that the molten droplets of Ni398 coatings have an average structure thickness of 20-40 #m while the microstructure of Ni818 coatings is flat with width of 5-20 #m.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2011年第4期309-314,共6页 金属学报(英文版)
基金 supported by the National Natural Science Foundation of China(No.50801066)
关键词 Electrospark deposition Nickel base alloy electrode Coatingproperty Electrospark deposition Nickel base alloy electrode Coatingproperty
  • 相关文献

同被引文献7

  • 1E.I. Zamulaeva,E.A. Levashov,A.E. Kudryashov,P.V. Vakaev,M.I. Petrzhik.Electrospark coatings deposited onto an Armco iron substrate with nano- and microstructured WC–Co electrodes: Deposition process, structure, and properties[J].Surface & Coatings Technology.2008(15)
  • 2X. Li,D.Q. Sun,X.Y. Zheng,Z.A. Ren.Microstructures and wear properties of TiN-based cermet coating deposited on 1Cr18Ni9Ti stainless steel by electrospark process[J].Materials Science & Engineering A.2008(1)
  • 3Zheng Chen,Y. Zhou.Surface modification of resistance welding electrode by electro-spark deposited composite coatings: Part I. Coating characterization[J].Surface & Coatings Technology.2006(3)
  • 4R.J Wang,Y.Y Qian,J Liu.Structural and interfacial analysis of WC92–Co8 coating deposited on titanium alloy by electrospark deposition[J].Applied Surface Science.2004(1)
  • 5张鲲,何业东,王德仁.电火花沉积MCrAlY涂层及其高温氧化行为[J].材料热处理学报,2008,29(4):143-147. 被引量:13
  • 6刘英坤,朱峰,伍超群,侯惠君.不同表面处理工艺下H13钢的高温耐磨性能[J].理化检验(物理分册),2012,48(10):645-648. 被引量:8
  • 7高文文,吴玉萍,杜海清,洪晟,王博.纳米Al_2O_3封孔对电弧喷涂3Cr13涂层耐腐蚀性能的影响[J].理化检验(物理分册),2013,49(12):785-789. 被引量:4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部