摘要
Based on thermodynamics calculation, the results of the formation temperature of MnS inclusions of non-quenched and tempered steel during heating process were dis- cussed. It is shown that while the solid fraction is 0.9, MnS inclusions began to precipitate in the final stage of solidification. The solidification process of 49MnVS3 non-quenched and tempered steel during heating has been observed in situ using a confocal scanning laser microscope （CSLM）, which agrees well with the thermody- namics calculation. MnS particles were coarsening during heating process, which would reduce the pinning effect on the austenite grain boundaries and bring about the ~11rtden ~r^wth ~f ,qnrn~ ~11,qtenif.~ ~r^ins in thi~ st~.g~.
Based on thermodynamics calculation, the results of the formation temperature of MnS inclusions of non-quenched and tempered steel during heating process were dis- cussed. It is shown that while the solid fraction is 0.9, MnS inclusions began to precipitate in the final stage of solidification. The solidification process of 49MnVS3 non-quenched and tempered steel during heating has been observed in situ using a confocal scanning laser microscope （CSLM）, which agrees well with the thermody- namics calculation. MnS particles were coarsening during heating process, which would reduce the pinning effect on the austenite grain boundaries and bring about the ~11rtden ~r^wth ~f ,qnrn~ ~11,qtenif.~ ~r^ins in thi~ st~.g~.
基金
supported by the National Natural Science Foundation of China(No.51074022)
