摘要
无锡市某污水处理厂扩建工程设计规模为23 000 m3/d,采用膜生物反应器(MBR)工艺,出水采用臭氧接触消毒工艺,设计出水水质执行《城镇污水处理厂污染物排放标准》(GB18918—2002)的一级A标准。介绍了该工程的概况、工艺流程、构筑物设计参数和设备配置情况,并总结分析了MBR工艺设计的经验体会。
The design capacity of extension project in a Wuxi municipal sewage treatment plant is 23 000 m^2/d. The membrane bioreator（MBR） and ozone disinfection are applied. The effluent quality meets the first level A criteria specified in the Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant （GB 18918 -2002 ）. The general situation, process flow, design parameters of structures and equipment configuration of this project are introduced. The experience of MBR design is also summarized and analyzed.
出处
《中国给水排水》
CAS
CSCD
北大核心
2011年第18期36-39,共4页
China Water & Wastewater
