摘要
采用Pt系负载型催化剂,在高压反应釜内进行了生物质快速裂解油(生物油)的低温加氢脱氧研究。考察了催化剂的种类(Pt/C和Pt/γ-Al_2O_3)、反应温度(180~240℃)和反应时间(20~80 min)对生物油加氢脱氧效果及产物收率的影响。实验结果表明,采用Pt/γ-Al_2O_3催化剂,在优化的反应条件(即反应温度220℃、反应时间60 min)下,生物油的脱氧率可达50%以上。产物分析结果表明,由于氧的脱除,提质油热值增加到33.45 MJ/kg,而羧基的转化使其pH提高到3.25;且产物实现了油水分离。该方法的特点是焦炭收率低(低于2%),因此催化剂的寿命长。
To improve the stability of the bio-oil obtained by fast pyrolysis of biomass, hydrodeoxygermtion of the bio-oil on supported Pt catalysts was carried out in an autoclave under mild conditions. The effects of catalyst type( Pt/C and Pt/y-Al203 ), reaction temperature( 180 - 240 0^C) and reaction time(20 -80 min) on the hydrodeoxygenation and product yields were investigated.
出处
《石油化工》
CAS
CSCD
北大核心
2011年第9期954-958,共5页
Petrochemical Technology
基金
国家高技术研究发展计划项目(2009AA05Z402)
关键词
生物油
低温加氢
加氢脱氧
提质油
铂催化剂
bio-oil
low temperature hydrogenation
hydrodeoxygenation
upgraded bio-oil
platinumcatalyst