摘要
以MBR工艺为核心,结合天津某经济区污水厂MBR示范工程,进行城市再生水规模化处理技术与应用研究。结果表明,系统出水各项指标满足城市污水处理厂污染物排放标准(GB/T18918-2002)规定中一级A标准和城市污水再生利用-城市杂用水水质标准(GB/T18920-2002),可以作为城市杂用及景观环境用水,且具有经济可行性。膜组件+导流筒的组合设计使得膜污染周期长,通过红外谱图分析,得到膜表面的主要污染物质为胞外聚合物。
The study was about the treatment technology and application of large-scale urban reclaimed water with the core of A/O-MBR process,and the study combined with a demonstration project of MBR waste water treatment in an Economic Zone of Tianjin.The results show that the indicators of the effluent meet the grade A standard of the Urban Sewage Treatment Plant Emission Standards(GB/T18918-2002) and the reuse of Urban Recycling Water-Water Quality Standard for Urban Miscellaneous of city and landscape water,and economically feasible.The long cycle of membrane fouling was made by the combined design of membrane + draft tube,the main pollutants of membrane surface was extracellular polymeric substance(EPS),which was obtained based on infrared spectrum analysis.
出处
《安徽农业科学》
CAS
北大核心
2011年第24期14791-14793,共3页
Journal of Anhui Agricultural Sciences
关键词
A/O-MBR
再生水
规模化处理
膜污染
胞外聚合物
A/O-MBR
Reclaimed water
Large-scale processing
Membrane fouling
Extracellular polymers