期刊文献+

吹塑薄膜用LDPE LD608树脂的开发 被引量:1

Development of LDPE LD608 for blown films
下载PDF
导出
摘要 通过研究低密度聚乙烯(LDPE)装置的反应工艺条件与产品物性的关系,确定了吹塑薄膜用LDPELD608树脂的生产工艺条件和质量指标通过控制开口剂母粒的质量波动、改造第五反应区引发剂泵、减少系统中凝胶的形成,保证了产品质量稳定。工业化试生产的产品性能测试及应用表明.薄膜的雾度、冲击强度和抗撕裂性能优于国内同类产品。 The production process conditions and quality specifications of low density polyethylene(LDPE) LD608 for blown films were determined by studying the relation between the process conditions of the LDPE plant and the physical properties of LDPE products. The stability of product quality was ensured through controlling the quality fluctuation of master batches with anti-blocking agents, improving the initiator pump of the fifth reaction zone and lessening gels formed in the system. The property test and application of the resin from the trial industrial production show that the haze, impact strength and tear resistance of the films made of the resin are superior to those of the domestic films of the same kind.
出处 《合成树脂及塑料》 CAS 北大核心 2011年第5期10-13,共4页 China Synthetic Resin and Plastics
关键词 低密度聚乙烯 吹塑薄膜 母粒 凝胶 相对分子质量及其分布 low density polyethylene blown film master batch gel relative molecular mass and its distribution
  • 相关文献

参考文献1

  • 1金日光,华幼卿.高分子物理[M]化学工业出版社,2000.

同被引文献1

  • 1洪定一.塑料工业手册[M].北京:化学工业出版社,1999..

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部